Greg,
In the Programs menu for Writelog V10 you should see a program called
Sound board mixer control
Run this before you bring up Writelog
It will have all the choices you have in your computer for four options:
Audio In ( for recording the contest )
Audio Out ( DVK to your rig )
Mixer
Audio Review ( playback of recorded files )
This should allow all the choices you need and the results will get stored
in the
.ini file for Writelog to use
Hope this helps
Ric KV1W
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Greg5TA@aol.com
Sent: Saturday, May 27, 2006 10:45
To: WriteLog@contesting.com
Subject: [WriteLog] Setup for two soundcards
I have put in two sound cards and I can manually select the right sound
card
and writelog works fine but will not automatically select the correct card.
The sound mixer control does not give me any choices it is just blank, I
have done this before and just forgot how I did it. I know I have to edit
the
.INI file. That brings up the other problem I can't find the .INI file. I
would
rather not reinstall but if I have to can do.
Thanks
Greg
KG5TA
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|