> will someone please explain to me why the USB II has a cable ( custom
> for the OMNI ) marked FSK!
For two reasons:
1) the FSK output is available when MMTTY is used with EXTFSK in the
following situations that I know of: MMTTY stand-alone, MMTTY with
Logger32, DX4Win, DXLab/WinWarbler, N1MM Logger, ACLog/K7RE RTTY,
and Hamscope.
2) The same cable is used with DigiKeyer. DigiKeyer has a UART output
from its microcontroller for FSK.
A comparison of the features of the microHAM interfaces is at:
www.microham-usa.com/compare.html
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
support@microham.com
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Ed
> Sent: Sunday, July 16, 2006 11:53 PM
> To: writelog@contesting.com
> Subject: Re: [WriteLog] RTTY INTERFACE
>
>
> Don Hill AA5AU wrote:
> > Joe explains it perfectly!
>
> ReallY? Just how many OmniVIB+s do you own and operate with the USB
> II?
>
> And Joe, W4TV wrote:
>
> > In the meantime, USB Interface II will work with WriteLog
> and the MMTTY plugin if MMTTY is configured for AFSK (Sound +
> COM-TxD).
> > 73,
> > ... Joe Subich, W4TV
> -------------------------
>
> Well, I don't use AFSK for the many reasons previously stated. And
> will someone please explain to me why the USB II has a cable ( custom
> for the OMNI ) marked FSK!
>
> I think I need to read the on line site papers again for the unit.
>
> 73
> Ed
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|