Guess you don't want direct responses. You have to save both the log
file and the configuration under "Setup" to save everything. Part is
stored in each place.
At 07:48 PM 9/9/2006, K0HB wrote:
>I recently decided that I might to try to move my contesting
>software from DOS to Windows, and have purchased a copy of Writelog.
>
>That was the easy part. Now this old geezer is trying to learn to use it.
>
>Up until now, my contesting has been on CT (DOS) so I'm happy to see
>a lot of the user interface supports my old CT habits.
>
>One of the things I can't figure out how to do is keep port
>settings, etc., from session to session in the same contest. For
>example, I set the program up for a mock session of ARRL November
>Sweepstakes CW. I will be using a microHAM CW Keyer which runs off
>a USB port which actually emulated two RS232 serial ports, one for
>the embedded K1EL WinKeyer and the other for Icom rig control. When
>I set these ports up under the "Setup" menu in WriteLog they work as
>expected, but if I exit the program and reenter loading the same
>log, the port settings do not persist from the previous session and
>must be setup again. What am I missing here..... the help files
>haven't revealed the method to make these settings "sticky" between sessions.
>
>Thanks for any help,
>
>de Hans, K0HB
>
>--
> ><{{{{*> http://www.home.earthlink.net/~k0hb
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web: http://www.writelog.com/
Jim Rhodes K0XU
jim@rhodesend.net
Experience is the thing you have left when everything else is gone.
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|