WriteLog
[Top] [All Lists]

[WriteLog] Writelog and Micro Keyer

To: writelog@contesting.com
Subject: [WriteLog] Writelog and Micro Keyer
From: "Paul Franson" <w2le@hotmail.com>
Date: Tue, 19 Dec 2006 15:57:07 -0500
List-post: <mailto:writelog@contesting.com>
Just setting up a new Micro Keyer with Writelog.  It reads the IC-7800 freq 
ok, sends CW ok through the Winkey interface.  But the PTT doesn't work.

In MK Control is on Com3, Winkey on Com4, and PTT on Com5, set to RTS

In Writelog (10.61) Com3 is set to IC-7800, Com4 CW is checked, Com5 is 
listed in the setup table.
All mode PTT on com port is checked. And command rig on com port is checked.

It works fine with N1MM

Any ideas?

Thanks

Paul  W2LE

_________________________________________________________________
Get free, personalized online radio with MSN Radio powered by Pandora 
http://radio.msn.com/?icid=T002MSN03A07001

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>