Jack ... Look under BANDS. See if the statement "LSB is really FSK" has a
check mark.
Highlight the statement to turn off check mark. This should take care of
your problem.
GL & 73
Ron KP2N
----- Original Message -----
From: "Jack Headley - W0KXZ" <w0kxz@brookings.net>
To: <writelog@contesting.com>
Sent: Thursday, March 08, 2007 9:13 AM
Subject: [WriteLog] Writelog entry window display error
> de W0KXZ - Jack - w0kxz@brookings.net
> I have Witelog RIG CONTROL working with my TS870. Everthing seems to work
> just fine except the readout at the left end of the ENTRY WINDOW refuses
> to recognize LSB. CW, FSK, AM, FM, & USB modes all display correctly and
> the frequency tracks correctly but when I go to LSB the display says FSK.
> Am running everything with 9600 port settings. I see some Kenwood users
> recommended 4800 port setting and I tried that but no change. Any ideas?
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|