Ron
I am still very interested in rig support for the Ten-Tec Argonaut-V,
but I am even more interested in rig support for the
Ten-Tec OMNI-VII. My understanding is that it uses the same or at least
very similar command set as the Ten-Tec Jupiter.
Here is a link to the programing documentation:
http://rfsquared.com/file_download/121
Thank you
Anthony
Ron k5dj wrote:
> Hi Tony, no the Argonaut isn't supported at this time.
> However, it you will send the documentation in your owners
> manual I will see what I can do about getting it supported.
> You can send me scanned or Fax it to me at: (512) 255-5000.
>
> Or send me a web page when we can get the documentation.
>
> 73, de Ron K5DJ
> ====================
>
> -----Original Message-----
> From: Anthony Luscre K8ZT [mailto:aluscre@neo.rr.com]
> Sent: Friday, February 25, 2005 4:14 PM
> To: k5dj@writelog.com
> Subject: WriteLog Rig Driver for Ten Tec Argonaut-V
>
> Is there a WriteLog Rig Driver for Ten Tec Argonaut-V?
> If not is there one under development, although. I am not proficient in
> programing, I have the rig and would be happy to work as Beta tester.
> Anthony
>
>
--
|--------------------------|
Anthony A. Luscre
K8ZT
Stow, Ohio
|--------------------------|
Visit My Website at
http://www.k8zt.com
|--------------------------|
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|