WriteLog
[Top] [All Lists]

Re: [WriteLog] W5XD Keyer with DX4Win

To: Redd Swindells <ai2n@twcny.rr.com>
Subject: Re: [WriteLog] W5XD Keyer with DX4Win
From: Al Bailey <k8six@comcast.net>
Date: Wed, 07 Nov 2007 16:28:49 -0500
List-post: <mailto:writelog@contesting.com>
I use the W5XD with both WL and DXBase and it works FB.



At 03:50 PM 11/7/2007, Redd Swindells wrote:
>The only other logging program that I'm aware of that supports the W5XD
>keyer is DXbase.
>
>Wayne Rogers wrote:
> > I use Writelog with the K5XD keyer for contesting (SO2R), but my normal DX
> > working log is DX4Win.  I would like to leave the W5XD keyer in 
> line with my
> > microphone connected to it, but I can't seem to figure out how to make it
> > work with DX4WIN.  I normally only use one radio when not contesting.
> >
> > Couldn't find any help in DX4Win, or the Writelog 
> documentation.  Since the
> > microphone is connected through the soundboard, I've tried to get 
> it to work
> > through the sound board mixer - to no avail.  I believe the keyer defaults
> > to radio left, and so the mic audio probably passes through the keyer OK,
> > but how do I get the soundboard to channel the audio to the line out jack,
> > and so on to the radio?
> >
> > Everything works fine in WriteLog.
> >
> > Any suggestions?  Tired of plugging/unplugging mic connections!
> >
> > Thanks,  Wayne N1WR
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
> >
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>