I am having a rig control problem using the following:
Yaesu FT-767GX
West Mountain Radio RIGTalk RT-1 USB cable
Dell Inspiron 2650 laptop computer
Windows XP Home version
COM port set to com2, 4800,n,8,2 (I have also tried other Com ports)
WriteLog radio set to Yaesu FT-767
WriteLog port same as above
It works fine with DXLabs' Commander rig control software, but when I try to
use Writelog, it connects to the radio, but will not let me control the radio
either from the computer or WriteLog. When I quit WriteLog, it does not give
up control, even after shutting down the computer. I have to run the DXLabs
Commander to get rig control back.
(West Mountain Radio replies that they feel their hardware is OK (the RIGTalk
RT-1 USB cable) and that it is a setting in WriteLog)
I would really like to use Writelog. Any ideas would be greatly appreciated.
Thanks,
Bob Gates
KJ4IC
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|