Thanks to everyone who responded to my question.
The answer was found in the Writelog Help Manual. I kept the Icom 706MKIIG
setting at 0x58H and changed the baud to 19200. I then added a line into the
Writelog.ini file as instructed in the Help Manual after [RIGS] line and
made sure the com port was set to 19200 buad (this can be done from the Set
up, Ports function too):
[RIGS]
Icom IC-706=0x58
Com2:=19200,n,8,2
After this it worked like a cham.
Regards, Irwin
On Sun, Jul 13, 2008 at 12:06 PM, Irwin Darack <idarack@gmail.com> wrote:
> I am away from home and having trouble getting my Icom 706MKIIG Radio to
> configure to Writelog. I have checked the radio settings and CI-V is turned
> on and set to 53H (standard). I would appreciate any assistance.
> Thanks, Irwin KD3TB
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|