Hi Greg,
If you go to the WL screen and pull down the radio menu and select two
radios, you will see two log entry boxes. Using the up and down arrow keys
moves you back and forth and that toggles pin 14. Works great. You really
don't need a DXD and you absolutely do not need anything with a
microprocessor in it. What you need is a relay to transfer keying from one
rig to the other, another to transfer audio (this can be complicated by your
tastes) and a third to transfer PTT and a fourth to transfer audio. DPDT
relays can reduce the relay count. Software not required.
73
Hal
N4GG
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Greg - AB7R
Sent: Friday, July 18, 2008 11:18 AM
To: writelog@contesting.com
Subject: [WriteLog] SO2R LPT
I searched the archive for this but did not see anything definitive on this.
I have an interface similar to a TopTen DXD connected and have installed and
ran
DirectIO. WL sees the LPT port fine and is keying great through the LPT
port.
My question is how does WL swap radios? Does it use the standard pin 14?
If so,
what is the keystroke command to do this? With the keyer/interface in line
and
in "auto" mode I cannot get WL to change the radio focus. I can get the log
window
to change between 1 and 2. But when I transmit it always transmits on radio
2.
Thanks.
-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|