Bruce,
Brilliant! Thanks.
This is just what I was looking for. I have setup my shift+f3 to be %l %p1
tu nw %m10 but unfortunately this does not work. The first call is logged,
and the 2nd call is popped into the field, but the %c in the f10 buffer
plays the first callsign again, even though it's logged and the new callsign
is in the call field of the entry field.
It does work if I take the %l out of the shift+f3 buffer and simply enter
the qso into the log before hitting shift+f3, but it's too bad it takes that
extra keystroke.
Then again, 1 extra keystroke a few times in a contest isn't hurting my
score one little bit ;)
73 de Al, KE1FO
-----
Visit my amateur radio contesting blog at ke1fo.wordpress.com.
On Mon, Jan 5, 2009 at 4:29 PM, Bruce King <bruce@regis-consulting.com>wrote:
> Hi Al,
>
>
>
> Writelog has a call stack capability that works for both RTTY and CW. I
> have it set up for CW and it works fairly well. I checked it out on RTTY and
> will work there also, but may need some tweaking. I could have used this
> over the past weekend myself.
>
>
>
> What you are looking for are the three functions:
>
> EntryPushCallToQueue
>
> EntryPopCallFromQueue
>
> EntryWipeAndPopFromQueue
>
>
>
> The first takes the call currently in the entry window and pushes it onto
> the stack
>
> The second pops the call from the stack into the entry window call field
>
> The third clears the call field and pops the next stack entry into it.
>
>
>
> You need create/map keyboard shortcuts for them. I used
>
> Ctrl+Ext_INSERT
>
> Ctrl+Ext_DELETE
>
> Ctrl+W
>
> for each. The Ext_INSERT and Ext_DELETE keys are the Insert and Delete keys
> on an extended or full keyboard.
>
>
>
> For operational convenience you will also want to use one additional
> message buffer. I use this to automate the
>
> "TU NW (call)" transmission. I normally use the F3 buffer as invoked by the
> "+" key to send "TU QRZ W1CSM". I set up the SHIFT/F3 key to send "TU NW
> %M10 ". (M10 normally contains %C 'exchange data'). When invoked, it sends
> "TU NW, the new call in the entry field and the exchange". One minor
> operational difference is that you will have to manually hit Enter to log
> the QSO then hit SHIFT/F3 to start the QSO with the next station in the
> queue. A possible enhancement to Writelog would be to allow logging a
> contact to be forced by more than one key.
>
>
>
> A queued session would then consist of entering a call in the entry field,
> using ctrl/ext_insert to push it onto the stack, entering a second call in
> the entry field, working that station by using the Insert key, logging the
> contact via the Enter key, and then using the Shift/F3 key to acknowledge
> the QSO to the first station and send the exchange to the next station.
>
>
>
> You only need the Ctrl+Ext_DELETE key when you want to manually pop the
> next call from the stack into an empty call field. And, Ctrl+W when you want
> to pop the next call into the call field but clear it first.
>
>
>
> I have used this capability a few times while running during CW contests.
> It takes a little getting used to and some practice **before** the
> contest. Trying it out in the middle of a 100/hr run in the middle of the
> night doesn't work, trust me.
>
>
>
> It works the same way in RTTY. The issue for RTTY as I see it, and I am a
> confessed relative newcomer to RTTY contesting, is that when you use the
> alt/C function and pick a call to put in the call field, the cursor moves to
> the next entry field. You can invoke the ctrl+ext_insert on the call
> selected in the alt/c window and it gets pushed onto the stack; but you
> can't see the call on the stack and no call shows in the entry field either.
> You then have to pop once to populate the call field. My guess is that
> either the stacking function could be modified to make sure the call
> displays, or to make an option available to leave the cursor in the call
> field.
>
>
>
> Let me know what you come up with.
>
>
>
> 73 Bruce W1CSM
>
>
>
>
>
>
>
> Message: 4
>
> Date: Mon, 5 Jan 2009 11:51:33 -0500
>
> From: "Alfred Frugoli" <ke1fo@arrl.net>
>
> Subject: Re: [WriteLog] Call stack?
>
> To: k0bx@arrl.net
>
> Cc: writelog@contesting.com
>
> Message-ID:
>
> <77462a70901050851r6787358duc73dfc2d3a38b755@mail.gmail.com>
>
> Content-Type: text/plain; charset=ISO-8859-1
>
>
>
> I'm assuming this would only work on RTTY, and not other modes where the
> computer is not decoding for you. I'm looking for something more universal.
>
>
>
> 73 de Al, KE1FO
>
>
>
> -----
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|