Hi Joe and Group,
With my ProIII (CW or RTTY), when I send 1A 05 65 00 and read back the
results I do see 00
The same as, when I send 1A 05 65 01 and read back the results I see 01.
What it does do, is change the speed at which the clear button works - 1 sec
press and clear or instant clear. Which is what the book calls it Quick
RIT/XTX clear.
So I stand my ground from a previous post - There is NO RIT zero command
that I know of, or can find on an Icom (Pro III in this case).
Eric - Ve3gsi
> -----Original Message-----
> From: Joe Subich, W4TV
> Sent: January-19-09 12:41 PM
> Subject: Re: [WriteLog] Icom RIT *
>
>
> > Command 1A, Sub command 0565
>
> Only applies to 756ProII and ProII
>
> The 7700 uses 1A 050086, The 7800 uses 1A 050091, The 746Pro
> uses 1A 0529. The 7000 uses 1A 050077. I don't see the option
> for the 7200.
>
> RIT/XIT clear is not available on Icom radios prior to the
> 746Pro, 756ProII ...
>
> 73,
>
> ... Joe, W4TV
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|