WriteLog
[Top] [All Lists]

Re: [WriteLog] USB to CIV problem Solved!!!

To: K0BX <k0bx@arrl.net>
Subject: Re: [WriteLog] USB to CIV problem Solved!!!
From: Andrei Stchislenok <asnp3d@gmail.com>
Date: Tue, 1 Sep 2009 22:08:31 -0400
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Joe,

I am glad you solved it. I am looking right now in my Writelog ini and see
all Com's with "2" at the end but it works for me...

Anyway, it is good that you solved your issue.

Good luck!

2009/9/1 K0BX <k0bx@arrl.net>

> I want to thank all the guys that sent me email with possible solutions
> to my problem.
> My USB to CIV cable would not communication with Writelog.  Everything
> was set correctly but just wasn't working.
> So I got an e-mail from Joe W4TV (see below) on a possible solution.
> That did not work either, but while I was working on the Writelog.ini
> file in the [RIGS] section I
> noticed the following:
>
> [RIGS]
> Com4:=19200,n,8,2
>
> two stop bits?  I remember a longtime ago that I had the same problem
> communicating with my PK-232MBX and WL.  The solution was to removed the
> '2' but leave the comma.
> Well, I tried that, now it looked like:
> Com4:=19200,n,8,
>
> And like magic the communications between the PROII and the computer
> started working!!
>
> I then went over to the next operating position that had a new computer,
> a PROIII and the same cable/problem, but this time instead of removing
> the 2 stop bits I changed it to '1'.
> [RIGS]
> Com4:=19200,n,8,1  It worked too!.
>
> My rig at home, PROIII, using a normal serial port works fine with the
> Com4:=19200,n,8,2.  So I guess it is just the way the USB => CIV cable
> wants to see.
>
> BTW, this cable is one of the $1.99 plus $8.95 postage cables from Hong
> Kong.
>
> Just thought I would document the solution for anyone else that might
> have the same problem.  Special thanks to Joe W4TV.
>
> Joe K0BX
>
> Joe Subich, W4TV wrote:
>
> >
> >
> >>The only thing I can think of and can't find any mention is how
> >>do I turn on DTR or RTS to run te voltage to the USB cable?  I am
> >>pretty sure that is the problem.
> >>
> >>
> >
> >Look in the Writelog Manual (help file).  The information you
> >need is in the [Rigs] section of the writelog.ini ... see the
> >COMx_RTS_INIT and COMx_DRT_INIT directives.
> >
> >73,
> >
> >   ... Joe, W4TV
> >
> >
> >
> >
> >
> >
> >
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>



-- 
73's Andrei
EW1AR-NP3D
----------------------------------------------------
DXCC RTTY via LoTW only
Who has what? - World Wide Rating
Please visit: www.k4fo.com/cqrtty/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>