WriteLog
[Top] [All Lists]

Re: [WriteLog] MSG1.WAV file

To: <writelog@contesting.com>
Subject: Re: [WriteLog] MSG1.WAV file
From: "KC4HW" <kc4hw@centurytel.net>
Date: Sat, 21 Nov 2009 13:04:09 -0600
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Thanks Gary and all that provided help.  Gary this is probably what is going 
on.  
Thanks for taking the time to help.

Jim/KC4HW

On 21 Nov 2009 at 9:30, Gary AL9A wrote:

> More info from the Help manual:
> 
> The following three function keys are setup as described here only
> if you 
> set the CtCompatibleAccel entry in WRITELOG.INI: to value "YES".
> 
> F1
> Sends the programmed message corresponding to F11.
> 
> F11
> Clears the QSO data from the Entry Window
> 
> Ctrl+C
> Aborts any programmed message in progress for either CW or phone.
> 
> Sounds like your writelog.ini file has CtCompatibleAccel=Yes.  If so
> change 
> it to No and use msg2.wav for your CQ msg.
> 
> 73,
> Gary AL9A
> 
> 
> ----- Original Message ----- 
> From: "Gary AL9A" <al9a@mtaonline.net>
> To: <writelog@contesting.com>
> Sent: November 21, 2009 9:05 AM
> Subject: Re: [WriteLog] MSG1.WAV file
> 
> 
> > WL native messages start with the F2 key, msg2.wav, thru F11. 
> With this
> > scheme F1 is used to bring up the Help manual.  There is an
> optional 
> > setting
> > somewhere in WL (an ini setting?) to emulate the CT logging
> program 
> > message
> > keys.  I believe this allows the F1 key to work, but it uses the
> F11
> > message.  Sounds like this is your situation.  Look up CT mode in
> the Help
> > file and see how to disable it if this isn't what you want.
> >
> > 73,
> > Gary AL9A
> >
> > ----- Original Message ----- 
> > From: "KC4HW" <kc4hw@centurytel.net>
> > To: <writelog@contesting.com>
> > Sent: November 21, 2009 8:37 AM
> > Subject: [WriteLog] MSG1.WAV file
> >
> >
> >>I used Audacity to record my WAV files and stored then in an
> appropriate
> >> directory.I recorded MSG1.WAV as my CQ message.  When I push the
> F1 key,
> >> I get a window that comes up and says that MSG11.WAV is not
> there.  So I
> >> renamed the MSG1.WAV to MSG11.WAV and when I push the F1 key then
> it
> >> plays.
> >>
> >> Is this right?
> >>
> >> I guess it doesn't really matter.
> >>
> >> Jim/KC4HW
> >> http://www.AlabamaContestGroup.org
> >> http://www.AlabamaQSOParty.org
> >> _______________________________________________
> >> WriteLog mailing list
> >> WriteLog@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/writelog
> >> WriteLog on the web:  http://www.writelog.com/
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/ 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> 


Jim/KC4HW
http://www.AlabamaContestGroup.org
http://www.AlabamaQSOParty.org
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>