Hello Wayne,
One more item to check into if you would please.
I reported this a few versions back but thbe problem persists.
Cluster window only prints gibberish as if the TNC were in command mode
(MFJ-1274, MFJ-1270C and PK-80 with MFJ chip tried.)
Same TNC's run UIView32 most excellent so no problems with the hardware.
Telnet works fine but I must ask one thing,
When logged in to Telnet cluster I searched for a friend in the INQP with
(sh/dx n9p)
Every new and OLD spot showed in the bandmaps (2 rigs) regardless of the age of
the spot.
I don't recall that happening before, is that normal?
Thanks, CU all in Dayton...Can't wait...!!!
Clay Melhorn N9IO Bonfield, IL
Webmaster: KARS - Kankakee Area Radio Society - W9AZ http://www.w9az.com/
> From: w5xd@writelog.com
> To: writelog@contesting.com
> Date: Tue, 17 May 2011 14:21:07 +0000
> Subject: [WriteLog] Win98 support...broken in 10.85K
>
> Sometime during the development of 10.85, the ability to install on Windows
> 98 broke. The first beta, 10.85A was OK, but the second, 10.85B, was not. I
> have not yet figured out what broke. The problem happens at install time
> ("This installation package could not be opened. Contact the application
> vendor....")--if you could get it installed, I am pretty sure it would run.
>
> I am looking at this, but I am not sure I am going to find a solution.
>
> Wayne
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|