Don,
That might have been the case but it is NOT. I am running fsk from dtr on
com3 for the data and am set for fsk. I will try the lsb checkbox and see
if that does anything.
well that didn't do anything. It was already checked. So settings are:
Port:com3 with software generated FSK TXD.
Mode: 45-baud (60 WPM) Baudot.
TU type: Sound Board FSK
Data that I click on goes into the entry window normally. I did run the
ARRL RTTY roundup with those settings and it worked fine except for that one
issue that the function keys do not put data into the alt-k buffer so I have
to manually type stuff if I have that window open. So I usually close it
and hit the function keys needed then open the alt-k window again resulting
in a break in carrier each time I change modes.
BTW I AM using Rttyrite. Is there something that needs to go into
writelog.ini for it??
----- Original Message -----
From: "Don AA5AU" <aa5au@bellsouth.net>
To: "Alan Marshall" <acm@ultranet.com>; "writelog reflector"
<writelog@contesting.com>
Sent: Tuesday, November 29, 2011 5:11 PM
Subject: Re: [WriteLog] More 10-Meter RTTY questions
The only thing I can think of is perhaps you are running AFSK and did not
set WriteLog for "LSB is really FSK". So if your radio is in the LSB mode
and you are running AFSK, then WL thinks you are running a PHONE contest. By
enabling "LSB is really FSK", WL will know you are running RTTY and not
PHONE. Everything you need to know about "LSB is really FSK" can be found
at:
http://rttycontesting.com/writelog/lsbisreallyfsk/lsbisreallyfsk.htm
If this isn't the problem, let us know and we'll check other things.
73, Don AA5AU
>________________________________
> From: Alan Marshall <acm@ultranet.com>
>To: writelog reflector <writelog@contesting.com>
>Sent: Tuesday, November 29, 2011 4:01 PM
>Subject: [WriteLog] More 10-Meter RTTY questions
>
>All,
>
>I have an issue that is surely my ignorance. In Writelog with the focus on
>the call entry window, hitting alt-k brings up idle signals on my
>756-proII.
>BUT the function keys do nothing from here. I can type in normally and all
>is sent as typed. BUT the function registers are not feeding that window as
>they do in CW. What am I missing to make that work??
>
> -Alan, W1CCE
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web: http://www.writelog.com/
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|