Joe,
Thanks for the info.
73,
Marsh, KA5M
-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Joe
Subich, W4TV
Sent: Saturday, March 29, 2014 4:11 PM
To: writelog@contesting.com
Subject: Re: [WriteLog] Windows 7, CW and Direct I/O
Direct IO will not work with Windows 7/64. LPT is not supported
with Vista/64, Windows 7 or Windows 8. Get an inexpensive USB to
serial converter and do CW on the DTR line of the serial port.
Your LPT interface will work with a serial port if you connect to
the correct pins.
73,
... Joe, W4TV
On 3/29/2014 3:45 PM, Marsh Stewart wrote:
> I've been using Direct I/O with Windows XP SP3 to key the transceiver via
> the LPT1 port. Do I need Direct I/O with Windows 7 64-bit Pro to do the
> same?
>
> Marsh, KA5M
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|