WriteLog
[Top] [All Lists]

[WriteLog] K3 DVR

To: <WriteLog@contesting.com>
Subject: [WriteLog] K3 DVR
From: "Robert" <woodr90@gmail.com>
Date: Sun, 26 Feb 2017 22:33:41 -0600
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Is there any method that will allow function key (say F1) to send message in
Bank1 M1
And then allow function key (say F5) to send message in Bank 2 M1 
Without holding the REC button...
So the F key always defines which bank / M without issuing command to switch
banks

73 Robert W5AJ

http://n6ee.net84.net/Articles/Key.pdf


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces@mailman.qth.net] On Behalf Of
john@kk9a.com
Sent: Wednesday, June 15, 2016 6:55 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 DVR

No, I use F2:%GK10 F3:%GK11 F4:%GK12 F5:%GK13 and define these GK commands
in the writelog.ini. It works very well. N6EE wrote an excellent article on
setting it up with Writelog.

John KK9A


John Santillo u1004467 at warwick.net
Tue Jun 14 20:43:58 EDT 2016

Hello,



Has anyone ever successfully used these CAT commands with WriteLog?  I'm
trying to minimize the amount of times I have to reach for the M1 button by
using a function key on the keyboard.

*       Cat Macro strings used to play back Radio # 1 internal K3 CW/data
messages or DVR voice keyer messages

*       M1 = {CAT1ASC SWT21;}
*       M2 = {CAT1ASC SWT31;}
*       M3 = {CAT1ASC SWT35;}
*       M4 = {CAT1ASC SWT39;}

73,

John

N2HMM


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to woodr90@gmail.com

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>