Re: [WriteLog] RTTY in latest update?

["Joe Subich, W4TV" <lists@subich.com>]

On 4/10/2018 10:19 AM, Don AA5AU wrote:
> EXTFSK is not used with WriteLog.

*NOT TRUE!*  EXTFSK/EXTFSK64 can be used if one sets the
FSK Port in the RTTYrite menu to NONE and use the OCX
driver.

The example, using EXTFSK/EXTFSK64 with MMTTY in WriteLog,
can be found in the example configuration for microHAM USB
Interface III and WriteLog:
  <http://www.microham.com/Downloads/U3_WriteLog_Setup.pdf>
see page 3.

73,

   ... Joe, W4TV


On 4/10/2018 10:19 AM, Don AA5AU wrote:
> EXTFSK is not used with WriteLog. If you are using MMTTY, you must set the FSK port in 
> the Rttyrite port menu. If you have to use EXTFSK with MMTTY, then you should use 
> "Software-generated FSK" in WriteLog.
> Hope this helps.
> Don AA5AU
>
>        From: Stein-Roar Brobakken <post@lb3re.com>
>   To: writelog@contesting.com
>   Sent: Tuesday, April 10, 2018 6:56 AM
>   Subject: [WriteLog] RTTY in latest update?
>     
> Hello
> My XMMT / mmtty setting will not diddle after latest update.
>
> I tried mmtty directly and it works.
>
> I set EXT64, Xmmt and settings to both a comport and also to EXTFSK.
>
> Nothing happen
>
> Best Regards,
> Stein-Roar Brobakken
> LB3RE K3RAG
> www.lb3re.com
> post@lb3re.com
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>
>     
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/