That didn't work for me with 12.09F.
It always starts with 16 wpm, even if that is not one of the available
speeds.
What version are you using?
Steve, K6UM
On Wed, Mar 28, 2018 at 7:07 PM, Craig KØCF <k0cf@mchsi.com> wrote:
> Kari,
> Open the Setup menu, then choose "Ports...". In the dialog that
> comes up, use the left-right arrows in the top right corner to
> scroll to the right until you can see the tab "CW Speeds". Select
> it. You will see a grid of all the CW speeds. You can set these
> to whatever you like, but the first one in the second row is
> the default speed. Mine is set to 28, and my range of speeds is
> from 12 to 42 WPM in 2 WPM increments, e.g. 12, 14, 16... 28,30,32...
>
> Your preferences may vary!
>
> 73, Craig, KØCF
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 27 Mar 2018 18:41:51 +0200
> From: "Kari Gustafsson" <kari@sm0hrp.se>
> To: <writelog@contesting.com>
> Subject: [WriteLog] How to define default CW speed to be stored at
> start up, in ini file?
> Message-ID: <000001d3c5ea$822f8d90$868ea8b0$@sm0hrp.se>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi,
> Anyone know how to define the default CW speed at start up so one has not
> to
> do it all over every time you launch WL?
>
> I run SO2R so doing it on both radios would be attractive.
>
> 73s Kari SM0HR
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|