Thanks, Randy, that was the problem.
I'm using a Winkeyer USB and the speed control was set to 16wpm. I had not
checked the box to ignore the it, so it was using it for the start up value.
Steve, K6UM
On Thu, Apr 12, 2018 at 9:32 PM, Randy Thompson K5ZD <k5zd@charter.net>
wrote:
> I have been using WL since 1999 (not sure what version that was). My CW
> always defaults on start-up to the value that is in the first box of the
> second row of the CW Speeds Dialog.
>
> What device are you using to do the CW keying? Perhaps it is not being
> commanded correctly on startup. I have been using the W5XD Keyer and now
> the MicroHam MK2R+.
>
> Randy K5ZD
>
>
> > -----Original Message-----
> > From: WriteLog <writelog-bounces@contesting.com> On Behalf Of Steve Lund
> > Sent: Thursday, April 12, 2018 4:18 PM
> > To: Craig KØCF <k0cf@mchsi.com>
> > Cc: writelog@contesting.com
> > Subject: Re: [WriteLog] How to define default CW speed to be stored at
> > start up, in ini file?
> >
> > That didn't work for me with 12.09F.
> >
> > It always starts with 16 wpm, even if that is not one of the available
> > speeds.
> >
> > What version are you using?
> >
> > Steve, K6UM
> >
> > On Wed, Mar 28, 2018 at 7:07 PM, Craig KØCF <k0cf@mchsi.com> wrote:
> >
> > > Kari,
> > > Open the Setup menu, then choose "Ports...". In the dialog that comes
> > > up, use the left-right arrows in the top right corner to scroll to the
> > > right until you can see the tab "CW Speeds". Select it. You will see a
> > > grid of all the CW speeds. You can set these to whatever you like, but
> > > the first one in the second row is the default speed. Mine is set to
> > > 28, and my range of speeds is from 12 to 42 WPM in 2 WPM increments,
> > > e.g. 12, 14, 16... 28,30,32...
> > >
> > > Your preferences may vary!
> > >
> > > 73, Craig, KØCF
> > >
> > > ----------------------------------------------------------------------
> > >
> > > Message: 1
> > > Date: Tue, 27 Mar 2018 18:41:51 +0200
> > > From: "Kari Gustafsson" <kari@sm0hrp.se>
> > > To: <writelog@contesting.com>
> > > Subject: [WriteLog] How to define default CW speed to be stored at
> > > start up, in ini file?
> > > Message-ID: <000001d3c5ea$822f8d90$868ea8b0$@sm0hrp.se>
> > > Content-Type: text/plain; charset="us-ascii"
> > >
> > > Hi,
> > > Anyone know how to define the default CW speed at start up so one has
> > > not to do it all over every time you launch WL?
> > >
> > > I run SO2R so doing it on both radios would be attractive.
> > >
> > > 73s Kari SM0HR
> > >
> > >
> > > _______________________________________________
> > > WriteLog mailing list
> > > WriteLog@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/writelog
> > > WriteLog on the web: http://www.writelog.com/
> > >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|