Hi,
Kind of weird problem..I hope I can explain.
I just upgraded from 11.14C to 12.34K on WIN 7 OPS.
I use 3 rtty windows, RTTY RITE with MMTTY and 2Tone and a DXP38 TNC. The
DXP38 window works occasionally. When its not working, I am transmitting
(IC7600) and garbage continues to come across the screen like it is
oblivious to the fact I am transmitting. If i go to MODE in the DXP38
window and click on 45 baud (which is already check marked) I can start
copying in the window. As soon as I xmt and come back to receive it is not
copying. I can go to PORT and scroll down to the correct port, click on it
and it will start copying again, Xmit and it goes away and starts printing
garbage continually.
When I click on those I notice the indicator on the DXP38 appears to start
working too. It's like I have to "awake" something by clicking on a tab, to
get it copying again.
It just seems to be very unstable. Since I can control it with the mouse, I
have ruled out a hardware or a ( bad plug or cable) problem.
Has anyone had this happen with an external TNC situation?
Any help will be greatly appreciated.
73 Ken W0LSD
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|