Problem solved. With no specific TS-890 choice under rig selection,
I had been using the generic Kenwood, but found that the rig would not
QSY when clicking on a packet spot. Selecting TS-2000 solved that
problem, but I still had the generic [Kenwood_Commands] in the ini
file. When I made the rig selection and the heading in the ini file
match, the DVK worked as expected.
Steve KW3A
On 8/15/2019 2:34 PM, Steve Forst wrote:
????????Using my old TS-590SG, I was able to have Writelog play messages
recorded with the radio's voice board,?? with ini file settings:
[Kenwood_commands]
Macro_10=PB1;
Macro_11=PB2;
Macro_12=PB3;
Macro_13=PB4;
With %GK10 through %GK13 in WL's?? SSB voice macros, I could play
recorded messages 1 through 4.
No such luck with the 890.???? It looks like the Kenwood commands would be
PB115; for the first message, through PB165; for message 6 in the 890.
??I have made these commands work in other software (N3FJP), but can't
get the message playback in Writelog.
What am I missing.
73, Steve KW3A
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|