good to hear (hi hi) its fixed, or working correctly.
I’ve experienced the delay to describe, but, didn’t hear a delay in the
outgoing audio.
WL has a number of threads running concurrently. I suspect the thread that
updated the GUI got interrupted, but, thread sending serial data to the
radio/MHK ran to completion, at full speed.
KR
> On Sep 3, 2019, at 2:23 PM, Jim Johnson <jim@kc4hw.com> wrote:
>
> Hey Kevin, thanks for the help.
>
> OK, first of all, I ask one of my local friends to check my diddle and he
> heard my diddle and did not hear any delay in my messages. So guess the
> delay has to have something to do with the computer/operating system. So
> perhaps it has only taken 71+ years for me to figure out that I shouldn't
> worry about things that I can't do anything about... hi hi
>
> Now for the diddle issue for some reason and I don't know why, I obviously
> had deleted the comport in uRouter for the FSK setup. Reset that and then
> rebooted the system and all is good. I usually try to keep a directory with
> snips of all the setups for the different operating that I do, but for some
> reason I could not find the one for WL MTTY RTTY Setup. Hell I might have
> deleted it... who in the heck knows..
>
> Anyway, thanks again for the help! "We all need a little help from our
> friends!"
>
> Take care.
>
> Jim/KC4HW
>
>
>
> ----- Original Message -----
> From: Kevin Rowett <kevin@rowett.org>
> To: Jim Johnson <jim@kc4hw.com>
> Cc: <writelog@contesting.com>
> Sent: 9/3/2019 3:18:54 PM
> Subject: Re: [WriteLog] Writelog RTTY messages
> ________________________________________________________________________________
>
> what do you hear going out the radio?
>
> I suspect the print to the window is in a different process from the serial
> characters going to the radio.
>
> I do recall experiencing this, but, didn’t hear the radio delay at all.
>
>
>
> 73, K6TD
>
>
>
>
>
>> On Sep 3, 2019, at 1:16 PM, Jim Johnson <jim@kc4hw.com> wrote:
>>
>> Writelog 12.42G
>> MMTTY 1.68a
>> MicroKeyer/uRouter 9.1.5
>>
>> Just checking and trying to get my station setup for WW RTTY..
>>
>> I am having some issue with a delay in the F-keys messages.
>>
>> When I hit F1
>>
>> "test kc4hw "
>>
>> appears in the RttyRite window, after a couple of seconds then the rest of
>> the
>> message "kc4hw CQ %R%E" appears on the same line and is sent.
>>
>> I don't recall this being normal before. Anybody seen this before????
>>
>> Here is the complete message as it appears in the Writelog RTTY Message
>> dialog.
>>
>> test kc4hw kc4hw CQ %R%E
>>
>> This seems to effect all the F-key message as well. Actually any message
>> over 8 or 9 characters long seems to have a delay at that point in it before
>> sending the rest of the message.
>>
>> This is not the end of the world, but curious...
>>
>> "Seeking perfection in an imperfect world." Thanks in advance.
>>
>> Jim/KC4HW
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|