Well I fixed my problem. I'm basically 100% CW, so when I operate a
contest, I frequently use the Rittyrite spectrum window to provide a visual
zero beat. But, in a multi mode test like FD, if Rittyrite is open, then I
guess WL thinks one must be operating in a digital mode. Once I closed
Rittyrite, all the F key issues went away.
Thanks for the personal support gang.
73
Lex N4LF
On Sat, Jun 27, 2020 at 4:48 PM Jon Suehiro <nn5t@attglobal.net> wrote:
>
> Randy, I am in the same condition. WL 12.50H
>
> If I go back to 2020 WPX CW file on WL, then CW keying works with
> CW-Rttyrite.
>
> (Ports setting was saved in configuration.)
>
> I started the new WPX, browse 2020 WPX CW message with CW-Rttyrite, no
> problem.
>
> I recall 2020 ARRL June VHF Contest with CW-Rttyrite, CW won't key TS-890.
> I am so sure this was working last month.
>
> If I kills the CW-Rittyrite screen but no port change at all, WL keys K1EL
> Winkey (microHAM DKII) no problem.
>
> With CW Display (without Rittyrite), no problem on CW keying.
>
> I open the new Field Day, recall the CW exact message from 2020 WPX CW ---
>
> If no other window, CW keying no problem.
>
> With CW Display, CW keying no problem.
>
> With CW-Rittyrite, no CW keying.
>
> I guess I am lazy so I can use the DUPE check by CW-Rittyrite instead of
> typing the calls and was working till last VHF Contest. Now not working on
> VHF Contest (and FD).
>
> I don't know if Windows last major update with new Microsoft Edge really
> messed up a part of WL with Rittyrite function or not.
>
>
> Jon NN5T
>
>
> -----Original Message-----
> From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Randy
> Thompson
> Sent: June 27, 2020 19:49
> To: Lex Felker; WriteLog Reflector
> Subject: Re: [WriteLog] F Keys not working for FD
>
> Set the macros using Setup - Document Settings - CW/RTTY/SSB messages...
>
> Check your port settings that you are set up to send CW. Setup - WriteLog
> Options - Ports...
>
>
> Randy K5ZD
>
> -----Original Message-----
> From: WriteLog <writelog-bounces@contesting.com> On Behalf Of Lex Felker
> Sent: Saturday, June 27, 2020 2:58 PM
> To: WriteLog Reflector <writelog@contesting.com>
> Subject: [WriteLog] F Keys not working for FD
>
> I'm trying to operate FD on cw, but the F Key macros are not working. If I
> open any other log used recently, the macros work fine. I know it must be
> an operator error, but I can't seem to find where the set up for FD is any
> different from the other logs that are working. Rig freq is showing
> correctly, etc.
>
> I'm playing manually now, but that gets old quick
>
> Thanks
>
> Lex N4LF
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|