This butten moves Yaesu stock up one notch <smile>.
This key combination places the CPU in alignment mode. The service
manual talks about setting the Tx carrier point. Looks like for LSB
first, then USB. The values are written to an E-prom.
Have you made changes?
Dave WA0ZZG
AR
> From: Rodrigo Fernandez Mas <afernan@servidor.dgsca.unam.mx>
> To: "'yaesu@contesting.com'" <yaesu@contesting.com>
> Subject: [Yaesu] FAST+SSB in FT-900.
To: <yaesu@contesting.com>
> Date: Sun, 24 Nov 1996 14:32:17 -0600
> Hi all:
>
> Does anyone knows what is changed by pressing FAST + SSB in the FT-900 ?
>
> Thanks again!
>
> Rodrigo Fernandez Mas XE1SRF
> afernan@unamvm1.dgsca.unam.mx
>
>
> --
> FAQ on WWW: http://www.contesting.com/yaesufaq.html
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: ke7gh@contesting.com
> Sponsored by: Akorn Access, Inc & KM9P
>
>
--
FAQ on WWW: http://www.contesting.com/yaesufaq.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: ke7gh@contesting.com
Sponsored by: Akorn Access, Inc & KM9P
|