Yaesu
[Top] [All Lists]

[Yaesu] Ft-1000MP and the FH-1 Memory Keyer

To: <yaesu@contesting.com>
Subject: [Yaesu] Ft-1000MP and the FH-1 Memory Keyer
From: nated@MICROSOFT.com (Nate Dixon)
Date: Mon, 17 Mar 1997 08:00:38 -0800
Finally found out how to get the serial number function to work on the
FH-1.  It was from a Web site in Sweden.

To cut to the chase when programming key #1 with the Question Marks (do
not place a space between the Question Marks), that's right run them
together. Also use 3 Question Marks not 4 as described in the
documentation shipped with the unit.

Nate
N7OS

> ----------
> From:         Nate Dixon
> Sent:         Thursday, March 13, 1997 8:59 PM
> To:   yaesu@contesting.com
> Subject:      [Yaesu] Ft-1000MP and the FH-1 Memory Keyer
> 
> Any one been able to get the FH-1 to send serial numbers in the
> contest
> mode.  The instructions in the manual are not very good and the sheet
> shipped with the FH-1 is equally bad.
> 
> Says to key in 4 question marks where you want the serial number in
> the
> CQ (button 1).  Anyway I tried lots of combinations no go.  I have all
> of the menu functions turned on in the MP per the instructions (as
> best
> as I can tell anyway)
> 
> Comments welcome (and needed)
> 
> -Nate
> N7OS
> 
> > ----------
> > From:       Frank Davis[SMTP:fdavis@newcomm.net]
> > Sent:       Thursday, March 13, 1997 4:11 PM
> > To:         yaesu@contesting.com
> > Subject:    [Yaesu] Ft-1000MP
> > 
> > CAn anyone provide info on the following:
> > 
> > 1) What is menu item 1-7  "AUTOFAST"   for?
> > 
> > 2) Does anyone have the desriptive info on extended menu items 9-0
> to
> > 
> > 9-9?
> > 
> > 3) On my previous rig TS850S it was stated in the manual to keep the
> > ALC
> > deflection within the ALC bar range when opersting on CW and RTTY.
> > On the FT1000MP there is no instruction regarding this....and on my
> > unit
> > when the RF PWR control is at maximum the ALC deflection is 2 or 3
> > "blocks" beyond the end of the ALC bar range. Does this matter or
> not?
> > 
> > I've been using the rig for about 10days on CW and RTYY and am very
> > pleased with it.  The EDSP is awesome on CW!!
> > 
> > Frank VO1HP
> > 
> > --
> > FAQ on WWW:               http://www.primenet.com/~ke7gh/yaesu.html
> > Submissions:              yaesu@contesting.com
> > Administrative requests:  yaesu-REQUEST@contesting.com
> > Problems:                 owner-yaesu@contesting.com
> > Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA
> > 
> 
> --
> FAQ on WWW:               http://www.primenet.com/~ke7gh/yaesu.html
> Submissions:              yaesu@contesting.com
> Administrative requests:  yaesu-REQUEST@contesting.com
> Problems:                 owner-yaesu@contesting.com
> Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA
> 

--
FAQ on WWW:               http://www.primenet.com/~ke7gh/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>