Yaesu
[Top] [All Lists]

[Yaesu] Any Alternative to FIF-232C Interface?

To: <yaesu@contesting.com>
Subject: [Yaesu] Any Alternative to FIF-232C Interface?
From: duerbusc@MO.NET (Joseph J. Duerbusch K0BX)
Date: Tue, 03 Jun 1997 07:40:34 -0500
I would suggest the MFJ 232 Interface cable.  It takes it power from the
RS232 port, I have not rfi problems.  It is just plug and play.

I have made several of the MAX232 interfaces.  They all work well. 
Downside was the need for external 12 volts to run them.  Had RF getting
into one of them.  

Cost about $20 for homebrew, $50 for MFJ.  
-- 
Joe Duerbusch K0BX St. Louis MO
There are two major products to come out of Berkeley: LSD and
    UNIX.  We don't believe this to be a coincidence.

http://www.qrz.com/cgi-bin/qrz_gifs?k0bx.gif

--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>