Terry Bray wrote:
> Hi Team,
>
> Can anybody tell me how to modify the keyer in my FT1000D to enable me
> to
> have a straight key plugged into the back key jack and still have the
> keyer
> working in the front jack, this would enable both to be in line at the
> same
> time, but the keyer button on the front would have no effect on the
> back
> jack. I want to be able to plug in my computer to the back jack for
> contesting calls etc whilst still maintaining the paddles at the
> front.
>
> Thanks in anticipation,
>
> Terry
> G0JNZ
> Plymouth England
>
> --
> FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: owner-yaesu@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
Very simple. Just wire a 1/4" sterio phono plug with just the center
and shell connected. It will work as a straight key, but you must turn
the keyer off when using it. Put the 1000 in the CW mode, vox on and to
to it.
Good luck
de
--
Don Gaikins
W ØVM
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|