Yaesu
[Top] [All Lists]

[Yaesu] FT-1000D AF out sidetone

To: <yaesu@contesting.com>
Subject: [Yaesu] FT-1000D AF out sidetone
From: k4oj@tampabay.rr.com (Jim White, K4OJ)
Date: Sat, 30 Nov 2002 19:39:07 -0500
agreed

I thought I would cleanse the operatkng desk by taking the audio out of 
the speaker jack on the back - that way no plug sticking out of the rig 
in fron - then I found I had no control over the seidetone (moni) 
level... boy, I sure was loud!

My solution was to but some streamlined right angle stereo adpators from 
Radio Shack, they are molded and rather sleek - plu this allowed me to 
keep my mini plug which was in the speaker jack on the back....

Now I can go through a weekend without resulting deafness again... as 
the post states however if there were an EASY modification to allow all 
this to be done from the jack on the back I would prefer doing that in 
order to eliminate the plug which of course is right next to the drive 
control and hence in the way.

73,

Jim, K4OJ


Jim McCook wrote:

>Has anyone ever figured out a mod to supply fixed sidetone audio to the
>main VFO-A channel at the AF OUT jack?  Anyone who has tried to record
>at AF OUT knows that there is no sidetone or monitor audio available
>except at the channel for the SUB VFO, which is really useless.  It
>would be wonderful to have both sidetone and SSB monitor audio available
>there.  This would be a very worthwhile mod.  I get lost around Q3024 in
>the audio board, where it seems there is mixed output for both, ahead of
>the MONI switch.  It seems to be fed to the base of Q3052 for the sub
>VFO channel; it needs to be at Q3051 for the main VFO channel.
>
>Perhaps someone out there with real engineering talent may need this
>feature enough to figure it out.  It's way beyond me...
>
>Jim
>W6YA
>
>_______________________________________________
>Yaesu mailing list
>Yaesu@contesting.com
>http://lists.contesting.com/mailman/listinfo/yaesu
>
>  
>




<Prev in Thread] Current Thread [Next in Thread>