Disregard my previous message. v I found it finally on page 35 of manual.
this is what happens when fast key is pressed. Sorry for the band width.
73,
Ken W7TS
-------------------
Kenneth E. Kinyon
34 Princeton Circle
Longmont, CO 80503-2106
Voice: (303) 684-0037
Fax: (303) 776-5088
E-mail: W7TS@attbi.com
W7TS@qsl.net
W7TS@arrl.net
ALPCA #8339
ARRL-LM
-------------------
-----Original Message-----
From: yaesu-bounces@contesting.com
[mailto:yaesu-bounces@contesting.com]On Behalf Of Ken Kinyon - W7TS
Sent: Saturday, February 01, 2003 10:58
To: yaesu@contesting.com
Subject: [Yaesu] Ft-847 Band selection.
I have an FT-847, that I do not use often. It has been pressed into service
now while my main rig is being repaired.
This morning I found that when I pushed the band up down arrows, it would
cycle through 50 -144 -440 -7.0 only.
40 meters is the only HF band it would select. I think I remember
something about this when I first bought the radio. However a search of the
operating manual produced no solution. I had to do a master reset to
restore it to normal operation.
I would appreciate any help or advice.
Regards,
Ken W7TS
-------------------
Kenneth E. Kinyon
34 Princeton Circle
Longmont, CO 80503-2106
Voice: (303) 684-0037
Fax: (303) 776-5088
E-mail: W7TS@attbi.com
W7TS@qsl.net
W7TS@arrl.net
ALPCA #8339
ARRL-LM
-------------------
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|