Yaesu
[Top] [All Lists]

[Yaesu] FT-1000MP Dual antenna operation

To: <yaesu@contesting.com>
Subject: [Yaesu] FT-1000MP Dual antenna operation
From: k4oj@tampabay.rr.com (Jim White, K4OJ)
Date: Sat Aug 2 20:09:02 2003
....you could also use a "DPDT" coax switch or "transfer" switch... I 
have a B&W like that... I do not know the isolation on this type of 
switch however and wonder if having 1500W going near a wafer that leads 
to the RX ant jack is a good thing...  I use a grain of wheat bulb 
protector in line with the signal path just in case things get too "hot" 
on the R coax.

GL,

Jim, K4OJ



Paul Carr wrote:
> I guess I could do that, but I hoped there was a way that the two 
> antennas on the A/B switch could be used in that manner.  Both antennas 
> are capable of TX, in differnt bands, while one hears better and is 
> quieter even in the bands it is not resonate on.  I guess I may just 
> have to use an external coax switch and wire one port into the RX 
> antenna plug.
> 
> Jim White, K4OJ wrote:
> 
>> ...why not just use the receive antenna input for the antenna you want 
>> to listen on?
>>
>> K4OJ
>>
>>
>> _______________________________________________
>> Yaesu mailing list
>> Yaesu@contesting.com
>> http://lists.contesting.com/mailman/listinfo/yaesu
>>
>>
> 
> 
> 



<Prev in Thread] Current Thread [Next in Thread>