| To: | <yaesu@contesting.com> | 
|---|---|
| Subject: | [Yaesu] INRAD narrow and YAESU wide stock roofing filters | 
| From: | "David J Windisch" <davidjw@cinci.rr.com> | 
| Date: | Fri, 19 Aug 2005 18:52:56 -0400 | 
| List-post: | <mailto:yaesu@contesting.com> | 
Hi, all concerned: Is it reasonable, disregarding cosmetics/resale issues, to put in the ability to switch between the INRAD narrow and YAESU wide stock roofing filters? I used to monitor c-w activity in a-m bandwidth, bfo-on, 1950's-style, because it was nice not to have to tune or scan to hear what was going on in a 10-12KHz bandwidth. The TS-850S does this well, but it has a wide roofing filter. TIA, Dave Windisch, N3HE _______________________________________________ Yaesu mailing list Yaesu@contesting.com http://lists.contesting.com/mailman/listinfo/yaesu  | 
| <Prev in Thread] | Current Thread | [Next in Thread> | 
|---|---|---|
  | ||
| Previous by Date: | [Yaesu] FT-1000D: INRAD narrow and YAESU wide stock roofing filters, David J Windisch | 
|---|---|
| Next by Date: | [Yaesu] FT-1000D meter on xmit not reading in any position; ok on rcv, David J Windisch | 
| Previous by Thread: | [Yaesu] FT-1000D: INRAD narrow and YAESU wide stock roofing filters, David J Windisch | 
| Next by Thread: | [Yaesu] FT-1000D meter on xmit not reading in any position; ok on rcv, David J Windisch | 
| Indexes: | [Date] [Thread] [Top] [All Lists] |