Thanks Pat.
The radio reports between 13.6 volts, engine off, and 14.1 at 70 MPH.
Going to 5 watts doesn't help either.
73, Mike NF4L
Pat Wong wrote:
> Try setting the radio to the lowest possible output setting. Also get
> a volt meter and check how many volts your battery has without a
> load. It is possible the radio is telling you there isn't sufficient
> power to transmit.
>
> - Pat W. VE7DPT
>
> ------------------------------------------------------------------------
> From: /MikeR <nf4l@nf4l.com>/
> To: /Yaesu@contesting.com/
> Subject: /[Yaesu] FT-2600M/
> Date: /Wed, 09 Nov 2005 15:15:41 -0500/
> >Fired up the FT-2600M in the car today, after probably a month of
> >inactivity. When I key the mic, I get the bleeple and a voltage
> readout.
> >Otherwise, the panel looks normal. Receive is fine. I've done
> both CPU
> >re-sets, no joy.
> >73, Mike NF4L
> >_______________________________________________
> >Yaesu mailing list
> >Yaesu@contesting.com
> >http://lists.contesting.com/mailman/listinfo/yaesu
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|