Yaesu
[Top] [All Lists]

Re: [Yaesu] Roofing Filter problems!

To: "'Andreas Junge'" <andreas@n6nu.org>, <yaesu@contesting.com>
Subject: Re: [Yaesu] Roofing Filter problems!
From: "Alfredo Velez WP3C" <wp3c@aol.com>
Date: Mon, 20 Apr 2009 20:32:29 -0400
List-post: <yaesu@contesting.com">mailto:yaesu@contesting.com>
Ok, Andreas thanks for your help!

     The Mark V in the menu 9-1 number 11 I do not have noise, in the number
12 one db.
     The MP in the menu 9-1 number 9 I do not have noise in the number 10
one db.

It is normal that the Mark V is in the 11 and the MP 9? 73'

Alfredo Vélez WP3C
Web: http://www.wp3c.qth.com
email: mailto:wp3c@aol.com
WP3C DX Cluster Node: telnet://wp3c.hopto.org

-----Original Message-----
From: Andreas Junge [mailto:andreas@n6nu.org] 
Sent: Monday, April 20, 2009 8:15 PM
To: 'Alfredo Velez WP3C'; 'Andreas Junge, N6NU'; yaesu@contesting.com
Subject: RE: [Yaesu] Roofing Filter problems!

Alfredo,

my Mark V is running at 11 as well.  Sorry I could not be more helpful :-)

73, Andreas, N6NU

> -----Original Message-----
> From: Alfredo Velez WP3C [mailto:wp3c@aol.com] 
> Sent: Monday, April 20, 2009 5:11 PM
> To: 'Andreas Junge, N6NU'; yaesu@contesting.com
> Subject: RE: [Yaesu] Roofing Filter problems!
> 
> Hi Andreas
> 
>     I have a Mark V and I have installed the Roofing filter 
> and I do not have that problem. The setting is the same (Menu 
> 9-1 11 both radios)
>            Example: Mark V 28.400 1 or 2 db - MP 28.400 4 or 
> 5 db (Two radios with the same antenna & setting)
> 
> Alfredo Vélez WP3C
> Web: http://www.wp3c.qth.com
> email: mailto:wp3c@aol.com
> WP3C DX Cluster Node: telnet://wp3c.hopto.org
> 
> -----Original Message-----
> From: yaesu-bounces@contesting.com 
> [mailto:yaesu-bounces@contesting.com] On Behalf Of Andreas Junge, N6NU
> Sent: Monday, April 20, 2009 7:44 PM
> To: yaesu@contesting.com
> Subject: Re: [Yaesu] Roofing Filter problems!
> 
> Alfredo,
> 
> There is an amplifier on the filter board that is supposed to 
> make up for the filter losses. Maybe it's gain is to high. 
> Use the "Hidden Menu" as described in the installation 
> instructions to lower the IF amplification to adjust for that.
> 
> 73,
> 
> Andreas, N6NU 
> 
> 
> > -----Original Message-----
> > From: Alfredo Velez WP3C [mailto:wp3c@aol.com]
> > Sent: Monday, April 20, 2009 4:35 PM
> > To: yaesu@contesting.com
> > Subject: [Yaesu] Roofing Filter problems!
> > 
> > Hi
> > 
> >  
> > 
> >    When I install the filter to the Yaesu MP makes a QRM
> > (Noise) of 3 or 4 db, when removing the filter noise disappears. 
> > Someone can give me an explanation? Thanks and 73?
> > 
> >  
> > 
> >  
> > 
> > Alfredo Vélez WP3C
> > 
> > Web: http://www.wp3c.qth.com
> > 
> > email: mailto:wp3c@aol.com
> > 
> > WP3C DX Cluster Node: telnet://wp3c.hopto.org
> > 
> >  
> > _______________________________________________
> > Yaesu mailing list
> > Yaesu@contesting.com
> > http://lists.contesting.com/mailman/listinfo/yaesu
> > 
> 
> 
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
> 
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.287 / Virus Database: 270.12.1/2069 - Release 
> Date: 04/20/09 10:36:00
> 


No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.287 / Virus Database: 270.12.1/2069 - Release Date: 04/20/09
10:36:00
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu

<Prev in Thread] Current Thread [Next in Thread>