Hello Joe and James......Thanks to both of you for the replies...I will
check menu 6 - 3 and set it for offset. I don't know yet what it is
currently set at...I am running FSK here....I will let you know soon
how this turns out.
Thanks again. I appreciate your help very much.
73
Ted VE3SS
-----Original Message-----
From: Joe Subich, W4TV [mailto:lists@subich.com]
Sent: Sunday, April 17, 2011 1:58 PM
To: Ted Boerkamp; yaesu@contesting.com
Subject: Re: [Yaesu] FT1000MP and RTTY
>> I noticed that when I am casually operating and I see click on a
>> spot for a RTTY station from the DX spots window of Logger32,
>> the radio is not displaying the same frequency as the one posted.
>> (rig control is being used) I realize that most hams post the MARK
>> freq of a station and that what my radio is doing is displaying the
>> SUPPRESSED CARRIER FREQ.
Are you using FSK (RTTY) or AFSK (PKT) with the FT-1000MP?
In RTTY the FT-1000MP (and Mark V) can display either carrier or
Mark depending on the setting of Menu 6-3 (RTTY Frequency Display).
In PKT, the FT-1000MP can display either carrier or Mark depending
in the value of menu 6-5 (Packet frequency display offset) - set
it to 0 to display carrier or the (negative) value of your mark
frequency to display Mark.
If I recall correctly, Logger32 *expects* the FT-1000MP to display
Mark in RTTY (FSK) and carrier in AFSK (PKT) or USB and compensates
accordingly.
73,
... Joe, W4TV
On 4/17/2011 1:18 PM, Ted Boerkamp wrote:
> Hello all
>
> I have some questions regarding the MP(original) and RTTY. I
was
> not sure whether to post it on this
>
> reflector or the Logger32 reflector. I noticed that when I am casually
> operating and I see click on a spot
>
> for a RTTY station from the DX spots window of Logger32, the radio is
not
> displaying the same frequency
>
> as the one posted. (rig control is being used) I realize that most hams
post
> the MARK freq of a station and that
>
> what my radio is doing is displaying the SUPPRESSED CARRIER FREQ.
>
> What I notice however is that I have to tune the radio back to the MARK
> frequency to actually copy the station
>
> properly. Is there a setting in the MP to have the radio go to the MARK
> frequency like the spot shows, or is this the
>
> norm for all MP owners??
>
>
>
> example: YB1AR spotted this morning
>
>
>
> Telnet shows: 14.082.5 Mhz
>
> after clicking on spot
>
> Radio shows 14.084.62
>
> Bottom of MMTTY window shows 14.082.495
>
>
>
> I was able to copy YB1AR by tuning back so MP displayed 14.082.64
>
>
>
> Why when I click on a spot do I still have to "tweak" the MP to properly
> copy the station??
>
> or is there a setting in the MP or Logger32 that would adjust for this?
>
> I was able to work YB1AR and Logger32 saved 14.082.64 in the log.
>
>
>
> Any help is appreciated.
>
> Thanks
>
>
>
> Ted VE3SS
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|