Yaesu
[Top] [All Lists]

Re: [Yaesu] Battery current draw in an old FT-980

To: "Yaesu" <yaesu@contesting.com>
Subject: Re: [Yaesu] Battery current draw in an old FT-980
From: "Keith Dutson" <kdutson@sbcglobal.net>
Date: Tue, 4 Jul 2017 13:01:37 -0500
List-post: <mailto:yaesu@contesting.com>
I have an atomic wall clock that uses two AA batteries.  I put in two of the
Energizer Lithium batteries and the clock is still running after 6 years.
Those batteries read between 1.8 and 1.6 volts in normal use.  Once they
fall to 1.5, they usually are gone within a month or so.

73, Keith NM5G

-----Original Message-----
From: yaesu-bounces@mailman.qth.net [mailto:yaesu-bounces@mailman.qth.net]
On Behalf Of Ron Youvan
Sent: Tuesday, July 4, 2017 11:38 AM
To: y <yaesu@mailman.qth.net>
Subject: Re: [Yaesu] Battery current draw in an old FT-980

    Dave K4JRB Thompson wrote:

> I have an old FT-980 that uses 2 AA batteries (3VDC) to back up the
memories. I am looking at options and need an idea of what the current draw
is.  I suspect it is very low.  I have two options other than the AA
batteries...a 3 Vdc wall transformer and a 3V battery used in a game boy.

   I don't see a question in there, but I would investigate the expensive
high energy lithium cells (in the AA form factor) that put out 1.50 Volts, a
pair should last for years.
-- 
   Ron  KA4INM - Youvan's corollary:
                 Every action results in unwanted side effects.
______________________________________________________________
Yaesu mailing list
Home: http://mailman.qth.net/mailman/listinfo/yaesu
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Yaesu@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Yaesu] Battery current draw in an old FT-980, Keith Dutson <=