[Top] [All Lists]

Re: [Amps] issue with AL-1200 output

To: <>
Subject: Re: [Amps] issue with AL-1200 output
From: "Jim Thomson" <>
Date: Sun, 25 Jun 2017 16:41:15 -0700
List-post: <>
Date: Fri, 23 Jun 2017 21:38:05 -0400
From: Steve Bookout <>
Subject: Re: [Amps] issue with AL-1200 output

<Hello all,

Jim is right  I didn't mention what band.  I guess I was biased toward 
it being the output relay.

It was on 15 meters so I would not expect there to be any padder caps there.

Have been getting ready for field day today, so didn't mess with it.

First thing I'll do when I open it up is to solder across the output relay.

73 de Steve, NR4M

##  watch out soldering anything across the output relay.   If a contact is 
stuck,  welded, bridged ,etc, 
you dont want  1.5 kw back feeding towards the xcvr input relay contacts. 

## U really just  want to temp go from the  load output connector.... 
bypassing the output portion of the
relay altogether.

Jim  VE7RF

Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>