[Top] [All Lists]

[TenTec] Re: PTO Grease

To: <tentec@contesting.com>
Subject: [TenTec] Re: PTO Grease
From: chestert@pressroom.com (Chester Alderman)
Date: Fri, 10 Apr 1998 12:40:48 -0400
Hi Mike...yes, I was trying to be helpful although it sounded fecitious,
didn't it?

But then your initial email sounded like your friend knew more about the
PTO design than the engineers at TenTec...in any event.  

Somewhat more than 8 years ago I bought the PTO kit from TenTec, with the
RED GREASE and all, rebuilt the PTO and it's seen almost daily operating
since that time. No wobbly tuning, no strange feeling from 'hardened
grease' obtained from the Co-Op. 

Your second more detailed explanation sounds much more realistic than your
first one...don't get me wrong, I'm not your judge! I just don't believe we
show our fellow amateurs that its better to follow our 'amateur' advice
over the advice of the professionals who design this stuff for us to play
with. JMHO.


At 07:39 AM 4/10/98 -0400, you wrote:
>Hi Tom,  I was trying to be helpful -- were you?
>I had PTO's rebuilt at the factory on my Omni-C, Triton 544, and Argosy II,
>then put them in storage for 5 years.  When I took them out of storage, all
>the PTO's exhibited "classic symptoms of needing rebuilding" (mainly wobbly
>tuning, difficulty getting right on frequency).  Surely was not "worn

Chester Alderman
W4BQF  -Tom-

So many beautiful women....(sob)So little time.

FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Re: PTO Grease, Chester Alderman <=