KD9SV offers the transformer and 900 ohm resistor for the pennant antenna,
ready to go, very inexpensive. I am using his kit and works great.
It is stock number SV-PEN on his website: http://www.radiobooks.com/
On Sep 5, 2011, at 3:10 PM, Hardy Landskov wrote:
> I used 2--1800 ohm, 1 watt resistors in parallel. The resistance came out to
> be 920 ohms but close enough to see that the F/B ratio was 25 db or so.
> 73 Hardy N7RT
> ----- Original Message -----
> From: <email@example.com>
> To: <firstname.lastname@example.org>
> Sent: Monday, September 05, 2011 9:50 AM
> Subject: Topband: Termination resistor for 160-80- Pennant antenna
>> The 160-80 pennant antenna calls for a 900 ohm termination resistor.
>> Since 900 is not a standard resistor value, what is the best way to
>> accomplish this? Not enough room for a beverage at this qth!
>> Allan W2TN
>> UR RST IS ... ... ..9 QSB QSB - hw? BK
> UR RST IS ... ... ..9 QSB QSB - hw? BK
UR RST IS ... ... ..9 QSB QSB - hw? BK