Greetings all,
I have an old Yaesu FT-227R Memorizer 2 meter radio that I need to install a
CTCSS encoder in. I already have the encoder, the problem is that I have
moved recently and my manual is packed up with all my household goods, which I
will not be receiving for a while. The encoder I have (3rd party) installs
where the Yaesu encoder is supposed to go. I thought that the pins on the
board were marked as to function, but I was mistaken. Would any of you be
willing to look in your manual and guide me to the pins which provide + 12
VDC, ground, and CTCSS tone input. The pins are laid out in a rather odd
pattern and in may be difficult to describe their locations, but I certainly
would appreciate the help.
Thanks to all es 73,
Mike
KG8L
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|