Thanks Carl On my Omni 5 the af gain just comes off its peg along with the mic gain ,not very linear Ten tec could have done a better job with those too We are all waiting for something new from them
Hi everyone What is the crystal case size or type. for the group of crystals on the Oscilator board , And they freq for 40 meters . I see 21.5 . Is that kHz or MHz . I got a guy who makes them Thank
Hi everyone My Omni 5 loses 40 meters after about an hour ,both receive and transmit . This problem happens slow and it's a heat related problem Any suggestions ? 73 Gary N6biz Sent from my iPad
I'm a good American ,a veteran, been a ham since 63 To keep costs down on our new TT's we are about to receive, the powers to be need to have the boards assembled in Asia ,and the rigs assembled here
Really now some engineer can redesign a corsair 2 with the "parts" that aren't available now and we would have a better corsair 2 I have a corsair 2 that I bought that I really believe that it was th
I HAVE A 33 FT VERT ON A ROOF ABOUT 20 FEET UP WITH 100 11 FOOT LONG RADIALS TIED TOGETHER AT THE PERIMETER WITH A 9:1 HB BALUN USE IT ON ALL BANDS THROUGH A TUNER WORKS GREAT ON 80 TOO ON 20 ITS GRE
My OMNI d lost sensitivity on all bands except 20 used to be my noise level was s5 on all bands now it's half that but 20 is s5 where should I look 73 Gary N6biz Sent from my iPhone
The name or type of the plugs female side that TT uses for everything they make someone soldered on top of the plug on a few of them and I need to replace them Gary N6biz 73 Sent from my iPhone