I purchased this radio at a ham fest and it had many problems . Its now working but one problem persists. The display has tic marks that come and go in the upper part of each display segment. I also
The noise problem was generated by another radio in the shack and the covers were loose or removed so shielding was not good. I still have the tic marks. Any ideas? Thanks.
The OMNI VI is a piece of cake and you don't have to open the case. In the software menu you can actually adjust the Oscillator frequency from the front panel. Its in the manual. I have done it years
I have a relay that was made for the Triton series and maybe other radios. It is a drop-in replacement. I remember a problem with that relay some time back on the List. If anyone needs one I will sel
I have one brand new crystal oven from the OEM.....fits the OMNI VI radios. Will ship for $60.00 (net). Bought for a project but it was not the correct part I needed. Wes
I recently acquired one of these and don't have a use for it. Came with cables attached. I think it might have been used with the OMNI VI but not sure. Anybody help with info? It is for sale/ I don't
I have the following pieces for sale: TenTec 715 Speech Processor. It has no cables. It is in good cosmetic condition but it is not tested. It came from an Estate and other equipment has worked with
The RX320 radio is sold The TenTec 715 Speech Processor has been tested and works. It is in VG cosmetic condition. Asking $80 plus shipping. The TenTec KR-5A is still available for $40 plus shipping.
I have two crystal ovens that are used in the OMNI VI series radios. These are brand new. I am asking $50.00 each plus postage. Thanks, Wes K5APL Sent from Mail for Windows 10
Do any of the controls or S-meter or display work/change when its "locked up"? I'd try a Reset before doing anything else. As was said earlier, connectors could be a problem.
I would like to set my clock after installing a new battery. I press and hold LOCK and CHOOSE is displayed. Don't know what to do next cause anything I've tried reverts back to frequency/clock displa
Worked OK, turned it off. Next day it turned on but no Receive. It belongs to my friend so I brought it home to troubleshoot. What I know is: 1. It was intermittently working when it was turned on--s
Halleluyah I found the problem! The circuitry is still a puzzle to me so hopefully someone can shed some light on it: The Diode D10 on the Front End Board is actually two small diodes in series in my
Hi Gary Sorry, I was using ambiguous description of the problem location. I am referring to the Bandpass Filter Board 81409 that includes RF Preamplification. I understand that dodes in series increa
I have foam backing for the keypad. Mine had rotted away and lost its 'bounce'. It works better than no foam and better than too much foam backing. I had to buy a quantity, so if anyone needs some fo
I am looking for an INRAD #754 filter for my Omni V. It is 2.8 KHz bandwidth and frequency of 9001.5 KHz. Please let me know if you have one for sale. Thanks. Wes K5APL