Have like new Paragon II . Like new, no smoke, no scratches, scuffs, dents. All working 100%, full output. 60 meters ready. Have manual. 962 power supply working 100%, 9.9 cond. A couple nicks. 706 d
219 is a 250 Hz filter. Install in appropriate spot.....I believe there is a map on the filter cover. Either end may go either way, no orientation to worry about. best regards. K8VF
Yes. You just have to make sure the relay in rig will handle the voltage and current required by the amp. If not, you need to put a relay between the rig and amp. Mark
I don't remember if it is normal or not but is the 'MON' label on the bottom of the screen always set to 'ON' or do I have something wrong with my radio? Pressing 'ALT' and 'MON' will bring up the mo
If I remember correctly the omni V has an RCA jack on the back specifically for an amp T/R line. I am not referring to the jumpered pair you mentioned. The "return to receive" time is adjustable. I f
I had one where the guy blocked the relay. Like I said, I have had several rigs....on one the guy cut the lead on the transistor, I was able to drizzle solder from leg to board. Perhaps the relay is
Ah HA! The old "blocked relay" trick.... A suggestion: When we modify our rigs, guys and gals, how about documenting it some where in the manual, like on a fly sheet. Remember, you wont be around for
I have a minty condition Paragon II for sale with matching 962 P.S.in 9.8 condition. Both working 100% I am looking for $1050 shipped to 48 states. No filters included. Willing to trade toward Omni V
If that station doesn't work for you, I also have an Omni VI PLUS(model 564- a real PLUS) which is like new, no scratches, dents etc. Face is like new, silkscreen perfect. Marching power supply is in
Actually it is amazing how far off of the calling frequency some responders are. With a narrow filter you may have responders you are not hearing. Now in contest some are using 50-100Hz cw filters an
Has anyone had to replace the Main Tuning encoder on the Omni VI or PLUS? Anything to watch out for? Are they available, or is it necessary to find a junk rig? Thanks all. Mark
Is there a source for a replacement for the S-1 and S-2 switches in the 705 mic? (PTT and Vox switches) I just got this and it has defective switches on the board. I tried the Blue Shower treatment,
Thanks all. A good samaritan has a junker mic I can take the switches off of....... These are some pc mount switches form the 705 mic... Thanks again. Mark
Street prices on Our Favorite Rigs is far less than the Factory used price in most cases. It can be hard to determine a price from the "List"... Of course I just saw a fellow asking $3000 for an Orio
Try the paint dept at Home Depot, Sherwin Williams, ECT.... They can match just about anything these days with a good sample...... Worth a try.... Mark