Search String: Display: Description: Sort:

Results:

References: [ +from:Cqtestk4xs@aol.com: 964 ]

Total 964 documents matching your query.

61. [Towertalk] MFJ/Hygain etc (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Tue, 26 Nov 2002 20:32:38 EST
Good guy report....I am always amazed at the bad-mouthing MFJ/Hygain gets. I phoned an order for some ball bearings, a lower brake mount and a couple of odds and ends on Friday afternoon. All arrived
/archives//html/Towertalk/2002-11/msg00728.html (7,172 bytes)

62. [Towertalk] Power ground rod driver (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Wed, 27 Nov 2002 08:13:31 EST
I have some towers that are too far to "water drill". Since I am cheap and lazy, I use a 3/8 inch rebar cut with a grinding wheel to a point and slip a 1/2 inch copper tube which has also been cut to
/archives//html/Towertalk/2002-11/msg00745.html (8,122 bytes)

63. [Towertalk] Re: Insulated wire (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Thu, 3 Oct 2002 20:10:53 EDT
I picked up an enormous amount of #12 multi-stranded wire for next to nothing, but it was insulated. When making my quad loops for my 80m meter array I was surprised to find that they were all cut to
/archives//html/Towertalk/2002-10/msg00109.html (6,931 bytes)

64. [Towertalk] Clearing the guys (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Fri, 11 Oct 2002 15:21:20 EDT
I have been following the thread on clearing guy wires with rotating antennas side mounted and mounted on a rotating tower. K7LXC's suggestion about bending the elements to make the last little coupl
/archives//html/Towertalk/2002-10/msg00408.html (7,042 bytes)

65. [Towertalk] 40m 4sq array (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Fri, 18 Oct 2002 15:27:32 EDT
There is a thread similar to this going on the "top band" reflector. I had asked about verticals and several came back with comments about the K8UR array which K3LR used. By the way the antenna is la
/archives//html/Towertalk/2002-10/msg00595.html (6,832 bytes)

66. [Towertalk] Soldering at the top of the tower (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Sat, 19 Oct 2002 08:56:00 EDT
A thought which runs parallel to K4OJ's suggestion about having the necessary cordless drill.....How do the guys handle soldeiing up on top of the tower? I mean a very high tower at which wind is pre
/archives//html/Towertalk/2002-10/msg00623.html (8,507 bytes)

67. [Towertalk] lmr 400 question (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Sun, 20 Oct 2002 12:19:09 EDT
<< HUH? My RG213 cables seem to be holding up OK after 10 to 20 years service. Replacing every six months seems 'excessive' IMHO. After all of your weatherproofing measures, what exactly do you belie
/archives//html/Towertalk/2002-10/msg00656.html (8,742 bytes)

68. [Towertalk] Counterweights for wire verticals (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Mon, 28 Oct 2002 16:38:21 EST
I remember reading somewhere that a cinder/cement block can be used for this. The weight is around 40 lbs....well below the working strength of most rope. Want more pull?...two blocks or a bucket fil
/archives//html/Towertalk/2002-10/msg00805.html (8,517 bytes)

69. [Towertalk] Safe Fall Distance Tower to AC? (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Mon, 28 Oct 2002 19:36:45 EST
As Clint Eastwood would say, "Do ya feel lucky today punk, well do ya?" I guess it all depends on how comfotable you want to feel. I would want the tower to be at least equal to the distance from lin
/archives//html/Towertalk/2002-10/msg00815.html (6,781 bytes)

70. [Towertalk] Counterweights for wire verticals (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Mon, 28 Oct 2002 21:54:41 EST
Guy A lot depends on how high the antenna is and what kind of coax you have. The more pull from the weight of the coax you have on the coax, the more counterwieght is necessary. A forty pound concret
/archives//html/Towertalk/2002-10/msg00822.html (9,688 bytes)

71. [Towertalk] Counterweights for wire verticals (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Tue, 29 Oct 2002 09:10:15 EST
Why not use some of the antifreeze and a mix of water and fill it up? We don't worry about the antifreeze part here in sunny FL. K4XS
/archives//html/Towertalk/2002-10/msg00832.html (9,030 bytes)

72. [Towertalk] Counterweights for wire verticals (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Tue, 29 Oct 2002 15:48:54 EST
<< Politicians make good counterweights. Bob KQ2M >> Wrong , wrong, wrong Bob. Hot air weighs very little! K4XS
/archives//html/Towertalk/2002-10/msg00844.html (8,334 bytes)

73. [Towertalk] Sidemounting an A3S ?? (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Wed, 30 Oct 2002 08:21:25 EST
I use several A-3 antennas side mounted on my 40 meter stack tower. One of them is fixed SE and the others rotate on side arms. The only problems I noticed were: On the fixed SE, the SWR is higher, b
/archives//html/Towertalk/2002-10/msg00858.html (7,487 bytes)

74. [Towertalk] Re: Best tower height...Rotation of antennas (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Sun, 1 Sep 2002 18:33:15 EDT
If I had your options to consider, I'd keep the $$ from the second tower, put some of it into a Tic-Ring Rotator for the lower Yagi, and join in the fun on the air. (snip) If this thing is to be done
/archives//html/Towertalk/2002-09/msg00033.html (7,341 bytes)

75. [Towertalk] Nylon Rope (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Mon, 2 Sep 2002 17:14:17 EDT
Like N4KG, I have been using nylon rope to lift my suspended loop system up and down for three years. The nylon is in very good shape. It is showing normal wear and tear but looks very healthy consid
/archives//html/Towertalk/2002-09/msg00077.html (6,458 bytes)

76. [Towertalk] Guy Anchor Question (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Wed, 4 Sep 2002 16:09:01 EDT
<< Now when you get to the larger towers, of over 90 feet, then you have problems with screw anchors. >> Not always the case..suppose you are in an area whose perchedwater table rises and falls and o
/archives//html/Towertalk/2002-09/msg00152.html (8,675 bytes)

77. [Towertalk] screw in anchors (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Sun, 8 Sep 2002 11:57:14 EDT
I am constantly amazed with the amount of guys who use trees as guy anchors. One installation recently seen was a 70 foot Rohn 25 with a KT 34XA on top anchored to three trees. I may be overly causti
/archives//html/Towertalk/2002-09/msg00284.html (8,724 bytes)

78. [Towertalk] yagis in trees (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Mon, 9 Sep 2002 11:02:05 EDT
Sometimes doing it first and asking questions later is the ONLY way. I doubt if my county, which is pretty much a collection of subdivisions on my side of the county, would have ever approved THREE 2
/archives//html/Towertalk/2002-09/msg00329.html (8,935 bytes)

79. [Towertalk] Permission vs Forgiveness...was Tower in Trees (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Mon, 9 Sep 2002 15:35:25 EDT
I'll bet that fellow in Pinellas County put that one up a while back. I live just over the Pinellas County line in Pasco County. Several guys I know, including N4GI who has been posting on this subje
/archives//html/Towertalk/2002-09/msg00340.html (7,256 bytes)

80. [Towertalk] Phillystran break strength vs. diameter? (score: 1)
Author: Cqtestk4xs@aol.com (Cqtestk4xs@aol.com)
Date: Thu, 12 Sep 2002 15:16:15 EDT
There is one other reason not mentioned for not running the Phillystran down to the ground: fire. This may not be a consideration in the desert. However, none of my Philly runs closer than about 25 f
/archives//html/Towertalk/2002-09/msg00410.html (8,409 bytes)


This search system is powered by Namazu