Search String: Display: Description: Sort:

Results:

References: [ +from:amps@contesting.com: 999 ]

Total 999 documents matching your query.

161. Re: [Amps] Time for New Power Meter (score: 1)
Author: Glen Zook via Amps <amps@contesting.com>
Date: Thu, 7 May 2015 19:31:06 +0000 (UTC)
It does take some time for the file to download all 23-pages.  However, they are still blank!  I am going to try direct from the repeater builder site and see what happens. Glen, K9STH Website: http:
/archives//html/Amps/2015-05/msg00098.html (9,281 bytes)

162. Re: [Amps] Time for New Power Meter (score: 1)
Author: Glen Zook via Amps <amps@contesting.com>
Date: Thu, 7 May 2015 19:44:28 +0000 (UTC)
The PDF downloads fine when using the BAMA mirror site which the repeater builder actually references!  But, using the repeater builder URL it comes down blank! I even completely cleared the history,
/archives//html/Amps/2015-05/msg00099.html (9,762 bytes)

163. Re: [Amps] Date Code Samsung 120 MFD 450 Volt Capacitors? (score: 1)
Author: Glen Zook via Amps <amps@contesting.com>
Date: Mon, 11 May 2015 15:39:13 +0000 (UTC)
Just put an additional 450 volt capacitor in series to increase the safety factor. Glen, K9STH Website: http://k9sth.net From: "qrv@kd4e.com" <qrv@kd4e.com> To: "amps@contesting.com" <amps@contesting
/archives//html/Amps/2015-05/msg00104.html (8,391 bytes)

164. Re: [Amps] Date Code Samsung 120 MFD 450 Volt Capacitors? (score: 1)
Author: Gerald Williamson via Amps <amps@contesting.com>
Date: Mon, 11 May 2015 11:51:57 -0400
Or, if it a voltage doubler circuit, two more caps. Gerald K5GW In a message dated 5/11/2015 10:39:27 A.M. Central Daylight Time, amps@contesting.com writes: Just put an additional 450 volt capacitor
/archives//html/Amps/2015-05/msg00105.html (8,050 bytes)

165. [Amps] Hunter Bandit 2000C, arcing in the tuning cap. (score: 1)
Author: Kathy Bookmiller via Amps <amps@contesting.com>
Date: Sat, 16 May 2015 11:23:43 -0700
About 6 weeks ago I wrote about some problems I was having resurrecting a Hunter 2000C. Colin Lamb came through with the shorting switch I needed, thanks again Colin. The question of what the meters
/archives//html/Amps/2015-05/msg00115.html (7,930 bytes)

166. Re: [Amps] SPE 2K RTTY Duty Cycle (score: 1)
Author: Dennis W0JX via Amps <amps@contesting.com>
Date: Mon, 18 May 2015 09:45:33 -0700
I asked this very question from one of the two SPE vendors at Dayton. I got very evasive responses until I insisted on a plain and simple answer. Finally, the vendor stated that if you start at 1500
/archives//html/Amps/2015-05/msg00128.html (6,970 bytes)

167. Re: [Amps] SPE 2K RTTY Duty Cycle (score: 1)
Author: Dennis W0JX via Amps <amps@contesting.com>
Date: Mon, 18 May 2015 10:19:10 -0700
What I was seeking was how much "headroom" the SPE 2K has. I run my AL-800H at no more than 1000 watts out on RTTY, usually chasing DX. I am not an RTTY contester but I would like a new amp to have p
/archives//html/Amps/2015-05/msg00130.html (9,802 bytes)

168. [Amps] Testing 3CX1200Z7 tubes (score: 1)
Author: mike via Amps <amps@contesting.com>
Date: Sun, 24 May 2015 16:58:40 -0400
Can I test a 3CX1200Z7 tube in a Heathkit SB-220 amplifier? I have a 6.3 volt transformer I could use for the filament. The pin connections are the same. I could position a blower over the tube to su
/archives//html/Amps/2015-05/msg00187.html (6,737 bytes)

169. Re: [Amps] Testing 3CX1200Z7 tubes (score: 1)
Author: mike via Amps <amps@contesting.com>
Date: Sun, 24 May 2015 18:07:05 -0400
How much difference will 1 volt make on the filament? Mike It is 6.3 v but 25 amps. Sorry --Original Message-- From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of mike via Amps Sent: Sunday,
/archives//html/Amps/2015-05/msg00188.html (7,943 bytes)

170. Re: [Amps] Strange behavior (at least to me) (score: 1)
Author: Gerald Williamson via Amps <amps@contesting.com>
Date: Wed, 27 May 2015 20:46:08 -0400
Hi Steve, you might try putting a short strap across the vac relay terminals for a test. It sounds as if you might be loosing the plate load in an erratic manner. 73, Gerald K5GW In a message dated 5
/archives//html/Amps/2015-05/msg00203.html (10,647 bytes)

171. [Amps] 2 x blf578 schematic (score: 1)
Author: kf8od--- via Amps <amps@contesting.com>
Date: Fri, 5 Jun 2015 05:54:14 -0400
Looking for a 2 x blf578 schematic, anybody have one? 73, Mike KF8OD _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo
/archives//html/Amps/2015-06/msg00004.html (6,389 bytes)

172. Re: [Amps] Unauthorized PayPal charges Beware (score: 1)
Author: mike via Amps <amps@contesting.com>
Date: Thu, 11 Jun 2015 09:42:35 -0400
You can't blame Paypal for others charging for there services. That's why I don't have a PP account. But I do use it as a guest with my card. 73 David Harmon K6XYZ Sperry, OK --Original Message-- Fro
/archives//html/Amps/2015-06/msg00016.html (9,549 bytes)

173. Re: [Amps] SB-220 Replacement Tuning Cap (score: 1)
Author: Dennis W0JX via Amps <amps@contesting.com>
Date: Fri, 12 Jun 2015 20:00:01 -0700
Bill, I have the replacement capacitor in my SB-220. I wouldn't call it heavy duty but the spacing is wider than the original SB-220 tuning capacitor. I have had no problems with the band switch arci
/archives//html/Amps/2015-06/msg00025.html (7,549 bytes)

174. Re: [Amps] 3CX800 grid collet or SK1900 (score: 1)
Author: Gerald Williamson via Amps <amps@contesting.com>
Date: Mon, 15 Jun 2015 08:40:01 -0400
Hi Conrad, the four finger grid grounding may be there for the purpose of neutralizing the plate to cathode feedback path. Sort of like you may have seen individual fingers removed from fingerstock t
/archives//html/Amps/2015-06/msg00028.html (7,743 bytes)

175. Re: [Amps] 3CX800 grid collet or SK1900 (score: 1)
Author: Gerald Williamson via Amps <amps@contesting.com>
Date: Mon, 15 Jun 2015 11:41:03 -0400
Hi Steve, you may well be right about grid inductance not being needed at 2m. It could be more for saving some costs. This was the method used in the original Eimac published design by W6PO back in t
/archives//html/Amps/2015-06/msg00030.html (9,822 bytes)

176. [Amps] RE; 3CX800 grid collett (score: 1)
Author: Donald Fox via Amps <amps@contesting.com>
Date: Mon, 15 Jun 2015 09:14:07 -0700
In looking at an SK-2200 I have here in the shack, I see the 4 grid tabs spaced equally around the socket. However, the grid collet in my Henry 3002 is the real thing having finger stock all the way
/archives//html/Amps/2015-06/msg00032.html (6,818 bytes)

177. Re: [Amps] RE; 3CX800 grid collett (score: 1)
Author: mike via Amps <amps@contesting.com>
Date: Mon, 15 Jun 2015 14:02:46 -0400
I like the screws holding down the socket. It is indeed an interesting thread, however in my case I just felt that there was not enough contact at all and also this particular implementation was done
/archives//html/Amps/2015-06/msg00035.html (9,339 bytes)

178. [Amps] Henry amplifier transformer id (score: 1)
Author: mike via Amps <amps@contesting.com>
Date: Wed, 1 Jul 2015 19:37:24 -0400
I just purchased 3 Henry rack cabinets with the high voltage power supplies. The ECA transformer number is 1028. This powered a 3CX3000 tube. Can anyone ID the transformer? Voltage and current and pr
/archives//html/Amps/2015-07/msg00000.html (6,192 bytes)

179. Re: [Amps] Henry amplifier transformer id (score: 1)
Author: Glen Zook via Amps <amps@contesting.com>
Date: Thu, 2 Jul 2015 01:47:39 +0000 (UTC)
I also have a 1028 transformer.  It was used in the Henry 2000D r.f. generator.  From what I have found out about the transformer is that the power supply was rated at 3200-volts @ between 800 mA and
/archives//html/Amps/2015-07/msg00001.html (7,910 bytes)

180. Re: [Amps] Amps Digest, Vol 151, Issue 6 (score: 1)
Author: Steve via Amps <amps@contesting.com>
Date: Tue, 7 Jul 2015 13:55:56 -0400
Hi Steve, I converted an SB-220 to 6 meters for my friend Mike, UN8GC, and wrote up the results in a QST article in April 2008. The input circuit I used was a T-match. Each inductor consisted of 10 t
/archives//html/Amps/2015-07/msg00018.html (7,545 bytes)

Current List: 161 - 180
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20]
This search system is powered by Namazu