FWIW Rules for Sep 29-30, 2001 said, "One multiplier point for each US state (48) and each Canadian area (13)..." They also said, "Canadian areas are VO1, VO2, VE1 (NB, NS & PEI), VE2, VE3, VE4, VE5,
Hi Don, My MkV Manual on page 17 shows the 4-pin RTTY Jack. Nothing is labelled SHIFT. Pin 1 goes to TNC FSK OUT Pin 2 goes to TNC AF IN Pin 3 is PTT Pin 4 is GND Hope this helps 73 de Jim Smith VE7F
I don't see how one can conclude that Class D DX stations don't count. Item 1. says explicitly that DX in other regions may be contacted for credit. There is no qualification as to Class of DX statio
You are quite right. I did miss the point. It never ceases to amaze me how often I wish I hadn't sent an e-mail message! Thanks for the no-flame, courteous response, John. Jim VE7FO
Thanks for the comments. What I think I would like to be able to change during a contest is the audio level into RITTY as I don't think it is working as well on weak signals as it can. I guess my que
Thanks for the suggestions, both here and direct. I'll implement a hardware level control and see how it works. I'll report the results here but probably not for a month or so (although the EA RTTY i
I have the same problem with 10.27G. C:\Program Files\Ham Radio\Writelog\Contest\ leaves only 1 or 2 letters visible of the contest name. The only solutions I can see are to change the layout of the
Thanks for the response Randy. Of course one could relocate WL but I have a huge number of files on my system and I use file management techniques to enable me to find what I want quickly. One of tho
Hi John, Don't know if this will help but I had problems with my AWE64 under Win98SE. After a few back and forths with Creative it turns out that the AWE64 uses some dll (or something - no expert her
I also use RITTY with WL. Sometimes it seems to work well on weaker signals and sometimes it doesn't. (No multipath or polar flutter.) I have this feeling that if the audio level isn't right RITTY do
Hi Paul, I use RITTY 4.5 with WL 10.27G. Works fine except I can't access RITTY audio settings from WL. Maybe 48 Meg RAM isn't enough. Hope this helps 73 de Jim Smith VE7FO Paul J Hanssen wrote:
Hi Ed, Here's an easy and cheap way to create sound files, stitch them together if you want and get rid of noise, pops, clicks, dead space etc. By cheap I mean free. I'm told that my DVP files sound
Doug, How about checking the published contest results for each contest you were in? That will tell you what category you entered. 73 de Jim Smith VE7FO
I run Win 98 and have no intention of causing a lot of grief by changing. Why would I want to spend money and endless amounts of time debugging problems to get to the same point where I am now. 73 de
Hi Dimitriy, I use version 4.53 with WL and WIN 98SE. I seem to recall that previous versions won't work with my setup. Don't remember why. Hope this helps 73 de Jim Smith VE7FO Dimitriy Borzenko wro
Joe, Check out http://www.rttycontesting.com/dualrx0.html Works FB. 73 de Jim Smith VE7FO Joe Subich, K4IK wrote: What is the best way to set up WriteLog to make use of the second VFO in rigs like th
Joe, I tried the AA5AU info and it led me to do what I think you want (although don't recall if I had a bandmap for each VFO). Check out http://dayton.akorn.net/pipermail/3830/2003-February/068287.ht
Hi Mike I don't either. But I do have a REACTY.EXE. I downloaded wl_cty.dat into the WL programs folder. Then, from Win Explorer, I double-clicked the REACTY.EXE file and it created the necessary DAT