Hi Joe, I'm totally new to getting spots into WL but I followed the instructions below with AR User and it works FB. I'm using V10.37 running under Win98 SE. I have a Linksys cable router and also Zo
Although many people thought they could select either the 500 or 250 Hz filters with the Nar1 and Nar2 filter buttons on the MkV they have found out that they can't. I have yet to hear from one perso
It seems to me that the cognoscenti prefer FSK to AFSK. I have never seen any reasons for this preference, probably because I haven't looked in the right place. So, what's the problem with just sendi
Some time ago I spent something like an hour composing a careful reply to someone's request for help, including checking that what I said actually worked by starting up WL and running a few tests. I,
I too use RITTY. I have found that running the Rx audio through a mixer allows me to adjust the audio level as needed. Originally, I had a lot of trouble getting reliable printing with signals S5 or
During the RTTY Sprint I ran into an annoyance that kept costing me time. Here's the scenario. Someone would call me, I would click his call into the Call field and respond with my canned exchange. S
The story is at http://lists.contesting.com/_3830/2004-03/msg00751.html I didn't realize that the clone RO function could be used as described with RITTY. Yes, RITTY is hard to tune quickly. I use th
Hi Al, So would I. I started work on this a little while ago but ran out of time for the project and don't know when I'll be able to get back to it. The basic idea was to write macros in Macro Expres
Hi Eric, While I concur with the others as to the likelihood of FD ops getting confused by too many buttons to remember, (I can't even remember all the buttons you have to push just to make an RTTY Q
Chris, I want the same. Unfortunately no idea of how to achieve it. Sure would be nice to have in WL. 73 de Jim Smith VE7FO G3SJJ wrote: I've renewed my subs and downloaded 10.47E so hopefully this t
I too was wondering about this. Thanks Jim. Another reason to stay with Win 98. 73 de Jim Smith VE7FO Jim Reisert AD1C wrote: At 08:44 AM 10/11/2004, ak0a wrote: Is anybody using RITTY in WriteLog un
Hi Bob, I switch back and forth between S&P and Run quite a bit in RTTY. I would sure like to find out how to get WL to automatically take care of this little chore that I often forget to do manually
Oddly, I'm having the same problem when sending QTCs. I have to hit ESC to get the thing to shut up once they're sent. Don't recall having this problem before. Don't know where I'd put a %E. 73 de Ji
Hi Eric, Some comments on your request "Trimmed down this still requires 136 character spaces, which won't work with the 82 character limitation. %C<sp2.wav>%B<b4.wav><gl.wav>%B<cpy.wav><nr.wav><sp2.
Hi Richard, If I understand this correctly, you have the pc mic, Spkr Out of pc#2 and Mic In of pc#1 all in parallel. The output impedance of the Spkr Out appears to the pc mic as a very low impedanc
Is it possible to send rig commands using Function keys? If so, you could store the appropriate command in an F Key message to turn RIT back on or restore your filter setting. Means you still have to
I think someone wrote about this a while ago. Something about using TweakUI in Windows Powertoys or something. Try an archive search for TweakUI. Hope this helps de Jim Smith VE7FO FireBrick wrote: I
In case you haven't found it yet it's at the bottom of the list of contests (at least on my list it is) and is called World Wide RTTY WPX. See you in the contest. 73 de Jim Smith VE7FO David Marshall
I'm about to perform my first WL upgrade since my initial copy which was 10.27G. I'm installing from the 10.50 CD. OS is Win 98SE. I use K6STI's RITTY with WL. 1. It isn't at all clear to me how to p
Hi Bob, My mic (Heil HC4) is always plugged into the mic in on the soundcard. The soundcard line outs (along with every other audio line, including the 4 inputs and 2 outputs of a 4 channel mixer) go