I have had very good success with Texas Towers in Plano 12' length it think is longest.. but fair and usually in stock .. best: mac/mc w5mc _______________________________________________ TowerT
Much like Elliott, I am also in the midst of rebuilding my rotor mast antenna system. I am using a Prop Pitch and a Green Heron prop pitch rotor controller. I'm comfortable with my wiring from the sh
I would add from my experience it is not necessary to pressurize this, if you had even considered it in the first place, esp if you feel your connectors are waterproof. My doubt is you are not going
HB= Home Brew ...made it myself sorta thing .. mac/mc w5mc On 12/21/2019 4:26 PM, Richard Smith wrote: Hi Jim, Sorry to sound dumb, but what is an hb coil? 73, Rich, N6KT On Saturday, December 21,
After years of quality service and dependability I have my PP on the ground and want to repack the case with the most reasonable source of grease to use to repack the so called gearbox as I have long
Paul thank you much, The K7NV website is a terrific source of all solid information, and i guess i missed where this grease type is mentioned. But indeed you nailed it my yester-year grease has broke
Small humor here, when you google "lube for life" a whole lot of 'personal' use's for lube pop up most all were intimate and very sexual related, Prop Pitch use's were not listed.. gonna have to r
Readers thank you for the quick and all helpful experiences. This is great Steve, and so welcomed help.. The Amsoil was easy to look up and review and skip the porn sites and advertisements by not e
Call Jeff at Green Heron he has these ... best: mac/mc w5mc _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contest
I consider myself to be very innovative or resourceful, while i dont recall a time where i have faced the stuck pipes together situation, Rich i like this idea and will not forget it, i await an oppo
Well the fun just does not end here and trying to get myself re-established and BOTA [back on the air] Last week i had the short raising cable, so i got smart and ordered a 75' of 5/16" upping the si
Ughh ? maybe just buy the 10' and cut it ... to fit/length mac/mc w5mc On 5/5/2020 10:47 AM, Richard Zalewski wrote: Hi, Looking for a piece of 1.5" galvanized or black pipe 5-6' in length to moun
In this VEIN dont overlook using GRC Galvanized Ridgid Conduit it will be in the electrical dept.. dont think Lowes offers it, but The Homer does, { Now dont get confused with EMT, this is the very
I'm with WV4P Ron here on the Start/run cap, bought tower new now 2 years ago, but only this month got it ready to install and raise, did pretty much your same fire drill only i bought the 589, but
I gotta grin here on this, locally most folks are going for 900' plus for water, and here on this hill I'm on add another 550' to get water, thru rock most, if not all the way. Be keen to see how you
Tim Carl might be responding to you, but myself and another local person have all but written and begged for help and or response. to no avail.. my thought is Carl might be having personal issues, b
Indeed I have done this and continue to do it, ONLY with using 1/2" superflex and not ONE issue or regret, absolutely not a single issue. Now that said, i do use a cable grip or woven sock, or at th
Ah ! i have done this and i will add with great success, AND my mast was 1/2" Chromoly 2" od and obviously then 1" id after drilling the hole i didn't use a bolt but rather a 1/2" spring pin or rol
these sound as typical of Hwy lighting tower as well, but this is a dream tower for the right person, it wont be cheep to fab up a fixed schism to hold a rotor and mast but at the same time not prohi
Rethinking what Steve has just posted, yah you bet some outside rings and mast/rotor centering is solved big time in a very positive way solid way. I'm all in now mm I'd install a couple of "ring c