Ah poop!! No Joy! I have the computer's IP set now at 192.168.1.20 The mask is set at 255.255.255.0 set the radio' G8WAY IP set to the computers at 192.168.1.20 the radio's IP remains the same at 192
John.. and the group JOY!!!! I had to "add the IP" into another box to get the thing to stick. but now, I have control over the omni VII and it seems to work.. Can't hear anything out of the computer
Al.. You know, that makes sense! WHile I don't have any teenagers hogging up bandwidth, and I live out in the sticks so security is not an issue, the price of a wireless game router is about $100 a h
Gang.... I am still a bit confused (easy to do ) but now that I have the omni VII talking to just one computer over a cross over ethernet cable..things look like they could get dicey. My next step wi
John and the gang.. You almost have it correct... the end goal is to be able to work the omni VII from my QTH while I am at a hotel in Moab UT. I now know I can talk to it with a cross over cable and
Gang!!! Many thanks for those ( Al, John, especially!) that helped me getting the IP address and what nots set up for the Omni VII network project. I can now say, the results are in and my Omni VII i
As far as I know, that can't be done for within the Ten Tec One plug interface. There are options I have seen that will allow control of external devices via the www. Nothing by ten tec, but some thi
Gang.. I purchased a double bazooka antenna at dayton. Got the antenna up and whoa!!! SWR out of this world. Tripped the Omni VII right off with a high current error. Checked the easy stuff.. 1. New
ran an ten tec 50 ohm dry dummy load out to the antenna end of the coax... squirted some rf into the line.. perfect swr with 100 watts of RF band is 40 meters, as the antenna is marked.. thanks for t
Yup! thought of that... so I tried every band and got the same results, some were however a lot worst.. I got the antenna from radiowaze at dayton. reading the eham reviews... maybe should have passe
Will do that. They're in a different time zone. Don't want to wake someone up from a deep sleep to complain about a antenna. Mike, WB8VGE SunLight Energy Systems The Heathkit Shop http://www.theheath
Gang! The antenna company sent a replacement antenna for the one that was causing all those weird problems I was having. The double bazooka is now up and it seems to work as it should. Bottom line? N
I'll let you know.. I've only had it up a few hours. My main antenna farm consists of vertical antennas. I have no trees or tower to hang wires from. The only tree i have is a rather beat up old waln
And it would like a simple 40m dipole just as well and the simple wire dipole will stand weather better. Mute point!! The bazooka is up in the air using a war surplus aluminum multisection pole. Its
Hey... aren't you suppose to be chipping paint on that slow moving target? Mike, WB8VGE SunLight Energy Systems The Heathkit Shop http://www.theheathkitshop.com/ J e e p o|||||||o Note: No trees were
I tried.. but could not find any spot where it was resonate.. Mike, WB8VGE SunLight Energy Systems The Heathkit Shop http://www.theheathkitshop.com/ J e e p o|||||||o Note: No trees were killed in th
gang... I've upgrade the firmware on my Omni VII to the newest version a month or so ago. Now, I got some time to sit down and play radio and notice that the "BW" label on the screen is missing the "
Gang.... I fired up my Argonaut 5 last night and it's quite un-usable. On all bands, from 80 through 10 i get noise so badly, the s-meter is pegged at S9+40 over. It's not the rig, all my radios hear
No, none of that here... but all HF frequencies are useless!! I called the power company, talked to a nice kid and "we'll get back with you." Took a AM broadcast radio with me for a walk. If I get wi
Gang... I've done the power off in the house. No joy! I have not yet yacked the pole, but Ill consider it. oh.. and this maybe important this noise seemed to come since we had a real roof rattler thu